9 material differences · fewer than 12
Tractor oneAGRIFULL A-90 DL-Turbo1993–1995No measured PTO figureTractor twoVALMET 6300-41991–2007No measured PTO figure
Which should you choose?
Read our verdict on the A-90 DL-Turbo and the 6300-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | A-90 DL-Turbo | 6300-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 83.8 hp | 83.8 hp | — |
| Engine declared | FIAT-IVECO 8045.05 Turbo | VALMET 420 DS/420 DSRE/44 DT | differs |
| Displacement declared | 3.91 L | 4.40 L | +13% 6300-4 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry LuK double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 9.1 gpm · 34.5 L/min | 18.4 gpm · 69.5 L/min | +101% 6300-4 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,900 lb · 3,130 kg | 8,973 lb · 4,070 kg | +30% 6300-4 |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 92.1 in · 2,340 mm | 91.7 in · 2,330 mm | — |
| Length declared | 139.8 in · 3,550 mm | 174.2 in · 4,425 mm | +25% 6300-4 |
| Width declared | 77.6 in · 1,970 mm | 79.1–102.8 in · 2,010–2,610 mm | differs |
| Ground clearance declared | 19.9 in · 505 mm | 17.1 in · 435 mm | +16% A-90 DL-Turbo |
| Turning radius, braked declared | — | 15.3 ft · 4.65 m | — |
| Fuel tank declared | 98.3 qt · 93.0 L | 167.0 qt · 158.0 L | +70% 6300-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
AGRIFULL A-90 DL-Turbo sources
- Source: Traktorenlexikon, “Agrifull A-90 DL”
VALMET 6300-4 sources
- Source: Traktorenlexikon, “Valmet 6300”