8 material differences · fewer than 12

Tractor oneMassey Ferguson MF 3065 (A)1988–1995No measured PTO figureTractor twoVALMET 6300-41991–2007No measured PTO figure

Which should you choose?

Read our verdict on the MF 3065 (A) and the 6300-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 3065 (A) and VALMET 6300-4, field by field
Field	MF 3065 (A)	6300-4	Gap
Engine
Engine power, claimed claimed	83.8 hp	83.8 hp	—
Engine declared	Perkins AT 4.236	VALMET 420 DS/420 DSRE/44 DT	differs
Displacement declared	3.87 L	4.40 L	+14% 6300-4
Maximum torque declared	216 lb·ft · 293 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated, dry and air-cooled VALEO single-disc clutch	—	—
Hydraulics & hitch
Pump flow declared	13.1 gpm · 49.5 L/min	18.4 gpm · 69.5 L/min	+40% 6300-4
Pressure declared	2,277–2,350 psi · 157–162 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,683 lb · 3,485 kg	8,973 lb · 4,070 kg	+17% 6300-4
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	93.3 in · 2,371 mm	91.7 in · 2,330 mm	—
Length declared	155.9 in · 3,959 mm	174.2 in · 4,425 mm	+12% 6300-4
Width declared	74.4 in · 1,889 mm	79.1–102.8 in · 2,010–2,610 mm	differs
Height, over the cab declared	103.1 in · 2,620 mm	106.9 in · 2,715 mm	—
Ground clearance declared	14.1 in · 357 mm	17.1 in · 435 mm	+22% 6300-4
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	156.4 qt · 148.0 L	167.0 qt · 158.0 L	+7% 6300-4

Source

Source