- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1983–1989
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 505/505-4 Full specifications
VALMET TD 33 DS 5 three-cylinder diesel. The manufacturer claimed 64.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
64.1 hp
47.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 505”, claimed
- Weight
- 7,760 lb
- 3-point lift
- 8,699 lb
- Top speed
- 18.6 mph
VALMET 505/505-4 specs: key facts
The VALMET 505/505-4 was built from 1983 to 1989.
The VALMET 505/505-4 has a claimed engine power (gross or net not stated) of 47.8 kW (64.1 hp); it has no measured PTO figure.
The VALMET 505/505-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The VALMET 505/505-4 has a VALMET TD 33 DS 5 engine, a 3-cylinder 3.30 L diesel unit.
The VALMET 505/505-4 weighs 3,520 kg (7,760 lb) unladen.
The VALMET 505/505-4 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the VALMET 505/505-4 lifts 3,946 kg (8,699 lb) at the lower-link ends.
Source · Traktorenlexikon, “Valmet 505”
How much horsepower does a 505/505-4 have?
The only figure for the 505/505-4 is 64.1 hp (47.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 505”
What engine is in a 505/505-4?
A 505/505-4 has a VALMET TD 33 DS 5, a 3-cylinder 3.30 L diesel engine.
| Make & model | VALMET TD 33 DS 5 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 201.3 ci · 3.30 L |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 505”
How much will a 505/505-4 lift?
A 505/505-4 lifts 8,699 lb (3,946 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pressure | 2,901 psi · 200 bar |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 8,699 lb · 3,946 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,893 engine rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 splines |
Source · Traktorenlexikon, “Valmet 505”
What transmission does a 505/505-4 have?
Transmission specifications for the 505/505-4 are below.
| Clutch | Pedal-operated dry LuK single-plate clutch |
|---|---|
| Steering | Hydrostatic DANFOSS steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Valmet 505”
How much does a 505/505-4 weigh?
A 505/505-4 weighs 7,760 lb (3,520 kg) unladen.
| Unladen weight | 7,760 lb · 3,520 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 93.2 in · 2,368 mmtwo-wheel-drive version |
| Length | 172.8 in · 4,390 mm |
| Width | 77.2 in · 1,960 mm |
| Height | 105.1 in · 2,670 mm |
| Ground clearance | 18.3 in · 465 mmtwo-wheel-drive version |
| Front track | 57.7–69.5 in · 1,465–1,765 mmtwo-wheel-drive version |
| Rear track | 59.1–82.7 in · 1,500–2,100 mm |
Source · Traktorenlexikon, “Valmet 505”
Which tractors compare with a 505/505-4?
Within 10% of its 60.3 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- VOLVO-BM-VALMET Volvo 50560.3 hp PTO, claimed · 1983–1985Side by side with the 505/505-4 →
- VALMET 6000-460.3 hp PTO, claimed · 1993–1996Side by side with the 505/505-4 →
- Massey Ferguson MF 383 (A)60.5 hp PTO, claimed · 1987–1994Side by side with the 505/505-4 →
- Landini R-7860 (DT) TL-20 N/M (TL-20 DT/M)60.5 hp PTO, claimed · 1988–2000Side by side with the 505/505-4 →
- John Deere 5400 (A)60.6 hp PTO, claimed · 1992–1997Side by side with the 505/505-4 →
- ZETOR 6321/6341 Super60.6 hp PTO, claimed · 1997–2004Side by side with the 505/505-4 →
Everything else people ask
Is a 505/505-4 two-wheel drive or four-wheel drive?
The VALMET 505/505-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 505/505-4 have?
A 505/505-4 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Valmet 505”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 505 — CC BY-SA 4.0, WIKIBOOKS-TL-116350 · revision 997675. Wikibooks contributors (Traktorenlexikon). Original document