- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1983–1989
WhichTractor size, not the maker’s category
VALMET 505/505-4 Hydraulics & PTO specs
11 hydraulics and PTO values on record for the 505/505-4.
Engine power, claimed · gross or net not stated
64.1 hp
47.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 505”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 505/505-4 lift?
A 505/505-4 lifts 8,699 lb (3,946 kg) at the lower-link ends.
| Pump flow | 13.9 gpm · 52.7 L/min |
|---|---|
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 8,699 lb · 3,946 kg |
Source · Traktorenlexikon, “Valmet 505”
What PTO does a 505/505-4 have?
A 505/505-4 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,893 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 splines |
Source · Traktorenlexikon, “Valmet 505”
Sources and how this page was built
11 hydraulics and PTO values from Traktorenlexikon, “Valmet 505”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 505 — CC BY-SA 4.0, WIKIBOOKS-TL-116350 · revision 997675. Wikibooks contributors (Traktorenlexikon). Original document