14 material differences
Tractor oneRenault 42-70 F1984–1986No measured PTO figureTractor twoVALMET 505/505-41983–1989No measured PTO figure
Which should you choose?
Read our verdict on the 42-70 F and the 505/505-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
14 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 42-70 F | 505/505-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 64.1 hp | 64.1 hp | — |
| Engine declared | MWM D 327-4 | VALMET TD 33 DS 5 | differs |
| Displacement declared | 3.77 L | 3.30 L | +14% 42-70 F |
| Maximum torque declared | 162 lb·ft · 219 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 505/505-4 |
| Clutch declared | Dry LuK double clutch type DT 250/228 G | Pedal-operated dry LuK single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.8 gpm · 29.4 L/min | 13.9 gpm · 52.7 L/min | +79% 505/505-4 |
| Pressure declared | 1,595 psi · 110 bar | 2,901 psi · 200 bar | +82% 505/505-4 |
| Three-point lift, at the coupling points declared | 5,622 lb · 2,550 kg | 8,699 lb · 3,946 kg | +55% 505/505-4 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,814 lb · 1,730 kg | 7,760 lb · 3,520 kg | +103% 505/505-4 |
| Wheelbase declared | 79.0 in · 2,006 mm | 93.2 in · 2,368 mm | +18% 505/505-4 |
| Length declared | 134.5 in · 3,416 mm | 172.8 in · 4,390 mm | +29% 505/505-4 |
| Width declared | 56.9–76.6 in · 1,445–1,945 mm | 77.2 in · 1,960 mm | differs |
| Ground clearance declared | 12.6 in · 320 mm | 18.3 in · 465 mm | +45% 505/505-4 |
| Fuel tank declared | 54.9 qt · 52.0 L | 190.2 qt · 180.0 L | +246% 505/505-4 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault 42-70 F sources
Source
- Source: Traktorenlexikon, “Renault 42-70 F R7396”
- Source: Traktorenlexikon, “Renault 90S R7396”
VALMET 505/505-4 sources
Source
- Source: Traktorenlexikon, “Valmet 505”