• Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1985–1988

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

DEUTZ-ALLIS 6060 specs: hp, weight, years

ALLIS-CHALMERS 433 T four-cylinder diesel. The manufacturer claimed 64.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

64.1 hp

47.8 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz-Allis 6060”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,699 lb
Hyd. flow
19.0 gpm
Top speed
15.5 mph

DEUTZ-ALLIS 6060 specs: key facts

  • The DEUTZ-ALLIS 6060 was built from 1985 to 1988.

  • The DEUTZ-ALLIS 6060 has a claimed engine power (gross or net not stated) of 47.8 kW (64.1 hp); it has no measured PTO figure.

  • The DEUTZ-ALLIS 6060 was offered in two-wheel-drive and four-wheel-drive versions.

  • The DEUTZ-ALLIS 6060 has a ALLIS-CHALMERS 433 T engine, a 4-cylinder 3.29 L diesel unit.

  • The DEUTZ-ALLIS 6060 weighs 2,585 kg (5,699 lb) unladen.

  • The DEUTZ-ALLIS 6060 has an independent rear PTO running at 540 rpm.

  • The hydraulic pump of the DEUTZ-ALLIS 6060 delivers 71.9 L/min (19.0 gpm).

Source · Traktorenlexikon, “Deutz-Allis 6060”

How does the 6060 compare with its class?

  • Strength:

    A hydraulic pump flow of 71.9 L/min is high for its class — 94% above the median of 37 L/min across the 327 machines within 10% of its power that hold this figure.

  • Limitation:

    Eight forward gears is low for its class — 33% below the median of 12 across the 389 machines within 10% of its power that hold this figure.

  • Strength:

    A 121 L fuel tank is high for its class — 57% above the median of 77.3 L across the 371 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 395 comparable records. How we work this out

Illustration of the 1985–1988 DEUTZ-ALLIS 6060, a 64 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 6060 have?

The only figure for the 6060 is 64.1 hp (47.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
64.1 hp

Source · Traktorenlexikon, “Deutz-Allis 6060”

What engine is in a 6060?

A 6060 has an ALLIS-CHALMERS 433 T, a 4-cylinder 3.29 L diesel engine.

Engine — 6060 engine specifications
Make & modelALLIS-CHALMERS 433 T
Cylinders4, liquid-cooled
Displacement200.6 ci · 3.29 L

Source · Traktorenlexikon, “Deutz-Allis 6060”

How much will a 6060 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 6060 are below.

Hydraulics & PTO — 6060 hydraulics and PTO specifications
Pump flow19.0 gpm · 71.9 L/min
Hitch categoryCategory 2
Rear PTOIndependent, engine-driven, 540 rpm @ 2,226 engine rpm

Source · Traktorenlexikon, “Deutz-Allis 6060”

What transmission does a 6060 have?

Transmission specifications for the 6060 are below.

Transmission — 6060 transmission specifications
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Deutz-Allis 6060”

How much does a 6060 weigh?

A 6060 weighs 5,699 lb (2,585 kg) unladen.

Weights & dimensions — 6060 weights and dimensions
Unladen weight5,699 lb · 2,585 kg4 WD: 2,948
Wheelbase93.0 in · 2,362 mm4 WD: 2,334
Length146.5 in · 3,721 mm
Width68.5 in · 1,740 mm
Height103.2 in · 2,621 mm
Ground clearance20.4 in · 518 mm4 WD: 460
Front track54.0–79.0 in · 1,371–2,007 mm4 WD: 1,499-1,930
Rear track57.0–89.0 in · 1,448–2,261 mm
Turning radius, braked11.0 ft · 3.34 m4 WD: 4,648

Source · Traktorenlexikon, “Deutz-Allis 6060”

What oil does a 6060 take, and how much?

A 6060 engine takes 10.0 qt (9.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

6060 fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.0 qt · 9.5 LSource: Traktorenlexikon, “Deutz-Allis 6060” · single source, not independently verified
Transmission12.0 qt · 11.4 LSource: Traktorenlexikon, “Deutz-Allis 6060” · single source, not independently verified
Cooling system16.9 qt · 16.0 LSource: Traktorenlexikon, “Deutz-Allis 6060” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 6060?

Within 10% of its 64.1 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the DEUTZ-ALLIS 6060

Is a 6060 two-wheel drive or four-wheel drive?

The DEUTZ-ALLIS 6060 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 6060 have?

A 6060 has a independent 540 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Deutz-Allis 6060”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Allis 6060 — CC BY-SA 4.0, WIKIBOOKS-TL-122395 · revision 1082855. Wikibooks contributors (Traktorenlexikon). Original document