8 material differences · fewer than 12
Tractor oneSAME Panther 95 (DT)1979–1981No measured PTO figureTractor twoSteyr 9094 a1993–1995No measured PTO figure
Which should you choose?
Read our verdict on the Panther 95 (DT) and the 9094 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | Panther 95 (DT) | 9094 a | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 92.7 hp | 92.8 hp | — |
| Engine declared | SAME DA 1055 P | Steyr-MWM WD 401.85 | differs |
| Displacement declared | 5.19 L | 4.16 L | +25% Panther 95 (DT) |
| Maximum torque declared | 251 lb·ft · 340 N·m | 260 lb·ft · 353 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 9.2 gpm · 35.0 L/min | 14.1 gpm · 53.3 L/min | +52% 9094 a |
| Pressure declared | — | 3,481 psi · 240 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 390/540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,242 lb · 3,285 kg | 8,642 lb · 3,920 kg | +19% 9094 a |
| Maximum permissible mass declared | — | 14,330 lb · 6,500 kg | — |
| Wheelbase declared | 98.4 in · 2,500 mm | 97.5 in · 2,477 mm | — |
| Length declared | 161.4 in · 4,100 mm | 165.2 in · 4,195 mm | — |
| Width declared | 82.7–102.4 in · 2,100–2,600 mm | 81.2 in · 2,063 mm | differs |
| Ground clearance declared | 17.9 in · 455 mm | 17.7 in · 450 mm | — |
| Turning radius, braked declared | 12.4 ft · 3.77 m | 15.7 ft · 4.80 m | +27% 9094 a |
| Fuel tank declared | 101.4 qt · 96.0 L | 105.7 qt · 100.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SAME Panther 95 (DT) sources
- Source: Traktorenlexikon, “SAME Panther 95”
Steyr 9094 a sources
- Source: Traktorenlexikon, “Steyr 9094”