• Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1983–1993

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Steyr 8075 (a) specs: hp, weight, years

Steyr WD-411.45 or WD-411.46 four-cylinder diesel. The manufacturer claimed 63.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

63.2 hp

47.1 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Steyr 8075”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,732 lb
3-point lift
5,732 lb
Hyd. flow
10.7 gpm
Top speed
15.5–24.9 mph

Steyr 8075 (a) specs: key facts

  • The Steyr 8075 (a) was built from 1983 to 1993.

  • The Steyr 8075 (a) has a claimed engine power (gross or net not stated) of 47.1 kW (63.2 hp); it has no measured PTO figure.

  • The Steyr 8075 (a) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Steyr 8075 (a) has a Steyr WD-411.45 or WD-411.46 engine, a 4-cylinder 3.46 L diesel unit.

  • The Steyr 8075 (a) weighs 2,600 kg (5,732 lb) unladen.

  • The Steyr 8075 (a) has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Steyr 8075 (a) lifts 2,600 kg (5,732 lb) at the lower-link ends.

  • The hydraulic pump of the Steyr 8075 (a) delivers 40.5 L/min (10.7 gpm).

Source · Traktorenlexikon, “Steyr 8075”

How does the 8075 (a) compare with its class?

  • Limitation:

    Eight forward gears is low for its class — 33% below the median of 12 across the 408 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 413 comparable records. How we work this out

Illustration of the 1983–1993 Steyr 8075 (a), a 63 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does an 8075 (a) have?

The only figure for the 8075 (a) is 63.2 hp (47.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
63.2 hp

Source · Traktorenlexikon, “Steyr 8075”

What engine is in an 8075 (a)?

An 8075 (a) has a Steyr WD-411.45 or WD-411.46, a 4-cylinder 3.46 L diesel engine.

Engine — 8075 (a) engine specifications
Make & modelSteyr WD-411.45 or WD-411.46
Cylinders4, liquid-cooled
Displacement210.9 ci · 3.46 L
Max torque169 lb·ft · 229 N·m @ 1,400 rpm
Electrical system12 V

Source · Traktorenlexikon, “Steyr 8075”

How much will an 8075 (a) lift, and what is its hydraulic flow?

An 8075 (a) lifts 5,732 lb (2,600 kg) at the lower-link ends.

Hydraulics & PTO — 8075 (a) hydraulics and PTO specifications
Pump flow10.7 gpm · 40.5 L/min
Lift at ends5,732 lb · 2,600 kg
Rear PTO540/1000 rpm

Source · Traktorenlexikon, “Steyr 8075”

What transmission does an 8075 (a) have?

Transmission specifications for the 8075 (a) are below.

Transmission — 8075 (a) transmission specifications
BrakesPedal-operated STEYR-SIMPLEX drum brake
SteeringHydrostatic ZF or Danfoss steering[class_1_2b@1: the source names alternative makers; the earlier English named only the first]
Top speed15.5–24.9 mph · 25–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Steyr 8075”

How much does an 8075 (a) weigh?

An 8075 (a) weighs 5,732 lb (2,600 kg) unladen.

Weights & dimensions — 8075 (a) weights and dimensions
Unladen weight5,732 lb · 2,600 kgtwo-wheel-drive version
Wheelbase83.4 in · 2,118 mmtwo-wheel-drive version
Length139.8 in · 3,550 mmtwo-wheel-drive version
Width68.0 in · 1,726 mmtwo-wheel-drive version
Height89.4 in · 2,270 mmtwo-wheel-drive version
Ground clearance17.8 in · 453 mmtwo-wheel-drive version
Front track52.3 in · 1,328 mmtwo-wheel-drive version
Rear track53.1–59.3 in · 1,350–1,506 mmthe article lists alternatives
Turning radius, braked10.9 ft · 3.32 mtwo-wheel-drive version

Source · Traktorenlexikon, “Steyr 8075”

What oil does an 8075 (a) take, and how much?

An 8075 (a) engine takes 10.1 qt (9.6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

8075 (a) fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.1 qt · 9.6 LSource: Traktorenlexikon, “Steyr 8075” · single source, not independently verified
Hydraulic27.5 qt · 26.0 LSource: Traktorenlexikon, “Steyr 8075” · single source, not independently verified
Front axle4.8 qt · 4.5 LSource: Traktorenlexikon, “Steyr 8075” · single source, not independently verified
Cooling system16.4 qt · 15.5 LSource: Traktorenlexikon, “Steyr 8075” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an 8075 (a)?

Within 10% of its 63.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Steyr 8075 (a)

Is an 8075 (a) two-wheel drive or four-wheel drive?

The Steyr 8075 (a) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does an 8075 (a) have?

An 8075 (a) has a 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Steyr 8075”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Steyr 8075 — CC BY-SA 4.0, WIKIBOOKS-TL-85254 · revision 996254. Wikibooks contributors (Traktorenlexikon). Original document