- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1995–1997
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-IH C-64 (A) Full specifications
Steyr WD 301.82 or WD 301.83 three-cylinder diesel. The manufacturer claimed 63.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
63.2 hp
47.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH C64”, claimed
- Weight
- 6,261 lb
- 3-point lift
- 6,437 lb
- Hyd. flow
- 11.2 gpm
- Top speed
- 18.6–24.9 mph
Case-IH C-64 (A) specs: key facts
The Case-IH C-64 (A) was built from 1995 to 1997.
The Case-IH C-64 (A) has a claimed engine power (gross or net not stated) of 47.1 kW (63.2 hp); it has no measured PTO figure.
The Case-IH C-64 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Case-IH C-64 (A) has a Steyr WD 301.82 or WD 301.83 engine, a 3-cylinder 3.12 L diesel unit.Source 2
The Case-IH C-64 (A) weighs 2,840 kg (6,261 lb) unladen.
The Case-IH C-64 (A) has a rear PTO running at 540/1000 rpm.
The three-point hitch of the Case-IH C-64 (A) lifts 2,920 kg (6,437 lb) at the lower-link ends.
The hydraulic pump of the Case-IH C-64 (A) delivers 42.3 L/min (11.2 gpm).
Source · Traktorenlexikon, “Case-IH C64”
How much horsepower does a C-64 (A) have?
The only figure for the C-64 (A) is 63.2 hp (47.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case-IH C64”
What engine is in a C-64 (A)?
A C-64 (A) has a Steyr WD 301.82 or WD 301.83, a 3-cylinder 3.12 L diesel engine.
| Make & model | Steyr WD 301.82 or WD 301.83Source 2 |
|---|---|
| Cylinders | 3, liquid-cooledSource 2 |
| Displacement | 190.2 ci · 3.12 LSource 2 |
| Max torque | 186 lb·ft · 252 N·m @ 1,500 rpm |
| Injection | Direct injection |
Source · Traktorenlexikon, “Case-IH C64”
How much will a C-64 (A) lift, and what is its hydraulic flow?
A C-64 (A) lifts 6,437 lb (2,920 kg) at the lower-link ends.
| System | Open centre |
|---|---|
| Pump flow | 11.2 gpm · 42.3 L/min |
| Lift at ends | 6,437 lb · 2,920 kg |
| Rear PTO | 540/1000 rpm |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Case-IH C64”
What transmission does a C-64 (A) have?
Transmission specifications for the C-64 (A) are below.
| Clutch | Dry Fichtel & Sachs double clutch |
|---|---|
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Case-IH C64”
How much does a C-64 (A) weigh?
A C-64 (A) weighs 6,261 lb (2,840 kg) unladen.
| Unladen weight | 6,261 lb · 2,840 kgtwo-wheel-drive version |
|---|---|
| Maximum permissible mass | 9,921 lb · 4,500 kg |
| Wheelbase | 87.0 in · 2,209 mmtwo-wheel-drive version |
| Length | 146.1 in · 3,710 mmtwo-wheel-drive version |
| Width | 81.5 in · 2,070 mm |
| Height | 95.5 in · 2,425 mm |
| Ground clearance | 17.5 in · 445 mmtwo-wheel-drive version |
| Front track | 52.7 in · 1,338 mmtwo-wheel-drive version |
| Rear track | 63.0 in · 1,600 mm |
| Turning radius, braked | 11.9 ft · 3.64 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Case-IH C64”
Which tractors compare with a C-64 (A)?
Within 10% of its 60.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Renault Ceres 32560.7 hp PTO, measured · 2000–2004Side by side with the C-64 (A) →
- Renault 70-32 PX60.7 hp PTO, claimed · 1989–1992Side by side with the C-64 (A) →
- Massey Ferguson MF 284 S (A)60.7 hp PTO, claimed · 1983–1989Side by side with the C-64 (A) →
- ZETOR 6321/6341 Super60.6 hp PTO, claimed · 1997–2004Side by side with the C-64 (A) →
- John Deere 5400 (A)60.6 hp PTO, claimed · 1992–1997Side by side with the C-64 (A) →
- Fiat 70-66 (DT)60.9 hp PTO, claimed · 1984–1991Side by side with the C-64 (A) →
Everything else people ask
Is a C-64 (A) two-wheel drive or four-wheel drive?
The Case-IH C-64 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a C-64 (A) have?
A C-64 (A) has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Case-IH C64”; and Traktorenlexikon, “Steyr 964”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH C64 — CC BY-SA 4.0, WIKIBOOKS-TL-115654 · revision 981190. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Steyr 964 — CC BY-SA 4.0, WIKIBOOKS-TL-85791 · revision 993739. Wikibooks contributors (Traktorenlexikon). Original document