8 material differences · fewer than 12

Tractor oneSteyr 8075 (a)1983–1993No measured PTO figureTractor twoSteyr 964 (a)1992–1997No measured PTO figure

Which should you choose?

Read our verdict on the 8075 (a) and the 964 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Steyr 8075 (a) and Steyr 964 (a), field by field
Field	8075 (a)	964 (a)	Gap
Engine
Engine power, claimed claimed	63.2 hp	63.2 hp	—
Engine declared	Steyr WD-411.45 or WD-411.46	Steyr WD 301.82 or WD 301.83	differs
Displacement declared	3.46 L	3.12 L	+11% 8075 (a)
Maximum torque declared	169 lb·ft · 229 N·m	186 lb·ft · 252 N·m	+10% 964 (a)
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	—	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	10.7 gpm · 40.5 L/min	11.2 gpm · 42.3 L/min	—
Pressure declared	—	3,481 psi · 240 bar	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,732 lb · 2,600 kg	6,261 lb · 2,840 kg	+9% 964 (a)
Maximum permissible mass declared	—	9,921 lb · 4,500 kg	—
Wheelbase declared	83.4 in · 2,118 mm	87.0 in · 2,209 mm	—
Length declared	139.8 in · 3,550 mm	146.1 in · 3,710 mm	—
Width declared	68.0 in · 1,726 mm	81.5 in · 2,070 mm	+20% 964 (a)
Height, over the cab declared	89.4 in · 2,270 mm	95.5 in · 2,425 mm	+7% 964 (a)
Ground clearance declared	17.8 in · 453 mm	17.5 in · 445 mm	—
Turning radius, braked declared	10.9 ft · 3.32 m	11.9 ft · 3.64 m	+10% 964 (a)
Fuel tank declared	63.4 qt · 60.0 L	66.6 qt · 63.0 L	—

Source

Source