8 material differences · fewer than 12

Tractor oneCase-IH C-64 (A)1995–1997No measured PTO figureTractor twoSteyr 8075 (a)1983–1993No measured PTO figure

Which should you choose?

Read our verdict on the C-64 (A) and the 8075 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Case-IH C-64 (A) and Steyr 8075 (a), field by field
Field	C-64 (A)	8075 (a)	Gap
Engine
Engine power, claimed claimed	63.2 hp	63.2 hp	—
Engine declared	Steyr WD 301.82 or WD 301.83	Steyr WD-411.45 or WD-411.46	differs
Displacement declared	3.12 L	3.46 L	+11% 8075 (a)
Maximum torque declared	186 lb·ft · 252 N·m	169 lb·ft · 229 N·m	+10% C-64 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5–24.9 mph · 25–40 km/h	differs
Clutch declared	Dry Fichtel & Sachs double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	11.2 gpm · 42.3 L/min	10.7 gpm · 40.5 L/min	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,261 lb · 2,840 kg	5,732 lb · 2,600 kg	+9% C-64 (A)
Maximum permissible mass declared	9,921 lb · 4,500 kg	—	—
Wheelbase declared	87.0 in · 2,209 mm	83.4 in · 2,118 mm	—
Length declared	146.1 in · 3,710 mm	139.8 in · 3,550 mm	—
Width declared	81.5 in · 2,070 mm	68.0 in · 1,726 mm	+20% C-64 (A)
Height, over the cab declared	95.5 in · 2,425 mm	89.4 in · 2,270 mm	+7% C-64 (A)
Ground clearance declared	17.5 in · 445 mm	17.8 in · 453 mm	—
Turning radius, braked declared	11.9 ft · 3.64 m	10.9 ft · 3.32 m	+10% C-64 (A)
Fuel tank declared	66.6 qt · 63.0 L	63.4 qt · 60.0 L	—

Source

Source