WhichTractor
  • Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1964–1974

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

OLIVER 1950 (4 WD) Full specifications

GENERAL-MOTORS 4V-53 N four-cylinder diesel. The manufacturer claimed 105.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

105.5 hp

78.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Oliver 1950”, claimed

Weight
12,974 lb
Hyd. flow
11.8 gpm
Top speed
15.5 mph

OLIVER 1950 (4 WD) specs: key facts

  • The OLIVER 1950 (4 WD) was built from 1964 to 1974.

  • The OLIVER 1950 (4 WD) has a claimed engine power (gross or net not stated) of 78.7 kW (105.5 hp); it has no measured PTO figure.

  • The OLIVER 1950 (4 WD) was offered in two-wheel-drive and four-wheel-drive versions.

  • The OLIVER 1950 (4 WD) has a GENERAL-MOTORS 4V-53 N engine, a 4-cylinder 3.48 L diesel unit.

  • The OLIVER 1950 (4 WD) weighs 5,885 kg (12,974 lb) unladen.

  • The OLIVER 1950 (4 WD) has a rear PTO running at 549/984 rpm.

  • The hydraulic pump of the OLIVER 1950 (4 WD) delivers 44.5 L/min (11.8 gpm).

Source · Traktorenlexikon, “Oliver 1950”

How much horsepower does a 1950 (4 WD) have?

The only figure for the 1950 (4 WD) is 105.5 hp (78.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
105.5 hp

Source · Traktorenlexikon, “Oliver 1950”

What engine is in a 1950 (4 WD)?

A 1950 (4 WD) has a GENERAL-MOTORS 4V-53 N, a 4-cylinder 3.48 L diesel engine.

Engine — 1950 (4 WD) engine specifications
Make & modelGENERAL-MOTORS 4V-53 N
Cylinders4, liquid-cooled
Displacement212.3 ci · 3.48 L
Max torque271 lb·ft · 367 N·m

Source · Traktorenlexikon, “Oliver 1950”

How much will a 1950 (4 WD) lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 1950 (4 WD) are below.

Hydraulics & PTO — 1950 (4 WD) hydraulics and PTO specifications
Pump flow11.8 gpm · 44.5 L/min
Rear PTO549/984 rpm

Source · Traktorenlexikon, “Oliver 1950”

What transmission does a 1950 (4 WD) have?

Transmission specifications for the 1950 (4 WD) are below.

Transmission — 1950 (4 WD) transmission specifications
ClutchFoot-operated dry Borg & Beck single-disc clutch
SteeringMechanical steering with hydraulic power assist
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Oliver 1950”

How much does a 1950 (4 WD) weigh?

A 1950 (4 WD) weighs 12,974 lb (5,885 kg) unladen.

Weights & dimensions — 1950 (4 WD) weights and dimensions
Unladen weight12,974 lb · 5,885 kg
Wheelbase105.0 in · 2,667 mm4WD: 2,165
Length159.5 in · 4,051 mm4WD: 3,874
Width86.5 in · 2,197 mm
Height75.0 in · 1,904 mm
Ground clearance18.5 in · 470 mm4WD: 343
Front track69.7 in · 1,770 mm4WD: 1,676/1,797
Rear track74.0–82.0 in · 1,880–2,083 mm
Turning radius, braked12.9 ft · 3.94 m4WD: 4,191

Source · Traktorenlexikon, “Oliver 1950”

Which tractors compare with a 1950 (4 WD)?

Within 10% of its 104.4 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 1950 (4 WD) two-wheel drive or four-wheel drive?

The OLIVER 1950 (4 WD) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 1950 (4 WD) have?

A 1950 (4 WD) has a 549/984 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Oliver 1950”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Oliver 1950 — CC BY-SA 4.0, WIKIBOOKS-TL-117545 · revision 1014622. Wikibooks contributors (Traktorenlexikon). Original document