- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1969–1971
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
OLIVER 2055 Full specifications
The manufacturer claimed 110.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
110.5 hp
82.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Oliver 2055”, claimed
- Weight
- 10,675 lb
- Hyd. flow
- 20.0 gpm
- Top speed
- 18.6 mph
OLIVER 2055 specs: key facts
The OLIVER 2055 was built from 1969 to 1971.
The OLIVER 2055 has a claimed engine power (gross or net not stated) of 82.4 kW (110.5 hp); it has no measured PTO figure.
The OLIVER 2055 is two-wheel drive (2WD).
The OLIVER 2055 weighs 4,842 kg (10,675 lb) unladen.
The OLIVER 2055 has an independent rear PTO running at 1000 rpm.
The hydraulic pump of the OLIVER 2055 delivers 75.7 L/min (20.0 gpm).
Source · Traktorenlexikon, “Oliver 2055”
How much horsepower does a 2055 have?
The only figure for the 2055 is 110.5 hp (82.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Oliver 2055”
How much will a 2055 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 2055 are below.
| System | Closed centre |
|---|---|
| Pump flow | 20.0 gpm · 75.7 L/min |
| Rear PTO | Independent, engine-driven, 1000 rpm |
| PTO shaft | 1,375"- 6 splines |
Source · Traktorenlexikon, “Oliver 2055”
What transmission does a 2055 have?
Transmission specifications for the 2055 are below.
| Steering | Hydrostatic steering |
|---|---|
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Oliver 2055”
How much does a 2055 weigh?
A 2055 weighs 10,675 lb (4,842 kg) unladen.
| Unladen weight | 10,675 lb · 4,842 kg |
|---|---|
| Wheelbase | 103.3 in · 2,623 mm |
| Length | 168.5 in · 4,280 mm |
| Width | 95.0 in · 2,413 mm |
| Height | 99.0 in · 2,515 mm |
| Ground clearance | 19.0 in · 483 mm |
| Front track | 54.0 in · 1,372 mm |
| Rear track | 64.0–96.0 in · 1,626–2,438 mm |
| Turning radius, braked | 10.8 ft · 3.28 m |
Source · Traktorenlexikon, “Oliver 2055”
Which tractors compare with a 2055?
Within 10% of its 104.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- J.I. Case 1090104.0 hp PTO, claimed · 1970Side by side with the 2055 →
- International Harvester 986104.2 hp PTO, claimed · 1976–1981Side by side with the 2055 →
- OLIVER 1950 (4 WD)104.4 hp PTO, claimed · 1964–1974Side by side with the 2055 →
- ZETOR 16045103.4 hp PTO, claimed · 1980–1984Side by side with the 2055 →
- Steyr 1200 (a)103.2 hp PTO, claimed · 1972–1975Side by side with the 2055 →
- Hürlimann H-6130 A105.4 hp PTO, claimed · 1979–1982Side by side with the 2055 →
Everything else people ask
Is a 2055 two-wheel drive or four-wheel drive?
The OLIVER 2055 is two-wheel drive (2WD).
What PTO does a 2055 have?
A 2055 has a independent 1000 rpm rear PTO on a 1,375"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Oliver 2055”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Oliver 2055 — CC BY-SA 4.0, WIKIBOOKS-TL-117559 · revision 1014846. Wikibooks contributors (Traktorenlexikon). Original document