Case-IH 9370 vs New Holland T 9030
10 material differences · fewer than 12
Which should you choose?
Read our verdict on the 9370 and the T 9030 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 9370 | T 9030 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 355.1 hp | 379.8 hp | +7% T 9030 |
| Engine declared | CUMMINS N-14 360 A | CUMMINS Cursor-13 | differs |
| Displacement declared | 14.02 L | 12.88 L | +9% 9370 |
| Maximum torque declared | 1,172 lb·ft · 1,589 N·m | 1,291 lb·ft · 1,751 N·m | +10% T 9030 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Oil-bath multi-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 27.2 gpm · 103.0 L/min | 40.6 gpm · 153.7 L/min | +49% T 9030 |
| Pressure declared | 3,002 psi · 207 bar | 3,336 psi · 230 bar | +11% T 9030 |
| Three-point lift at ends declared | 26,056 lb · 11,819 kg | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 33,786 lb · 15,325 kg | 41,780 lb · 18,951 kg | +24% T 9030 |
| Maximum permissible mass declared | — | 45,600 lb · 20,684 kg | — |
| Wheelbase declared | 144.0 in · 3,658 mm | 154.0 in · 3,911 mm | +7% T 9030 |
| Length declared | 296.7 in · 7,535 mm | 297.6 in · 7,558 mm | — |
| Width declared | 158.4 in · 4,023 mm | 120.1 in · 3,050 mm | +32% 9370 |
| Height declared | 142.8 in · 3,627 mm | 150.3 in · 3,818 mm | +5% T 9030 |
| Ground clearance declared | 14.4 in · 365 mm | — | — |
| Fuel tank declared | 1,079.9 qt · 1,022.0 L | 799.9 qt · 757.0 L | +35% 9370 |
Case-IH 9370 sources
Source
- Source: Traktorenlexikon, “Case-IH 9370”
New Holland T 9030 sources
Source
- Source: Traktorenlexikon, “New Holland T9030”