- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1961–1964
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 65 Mark-II Full specifications
Perkins AD 4.203 four-cylinder diesel. The manufacturer claimed 57.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
57.3 hp
42.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 65 Mark II”, claimed
- Weight
- 4,575 lb
- 3-point lift
- 2,500 lb
- Hyd. flow
- 4.0 gpm
- Top speed
- 12.4 mph
Massey Ferguson MF 65 Mark-II specs: key facts
The Massey Ferguson MF 65 Mark-II was built from 1961 to 1964.
The Massey Ferguson MF 65 Mark-II has a claimed engine power (gross or net not stated) of 42.7 kW (57.3 hp); it has no measured PTO figure.
The Massey Ferguson MF 65 Mark-II is two-wheel drive (2WD).
The Massey Ferguson MF 65 Mark-II has a Perkins AD 4.203 engine, a 4-cylinder 3.34 L diesel unit.Source 1
The Massey Ferguson MF 65 Mark-II weighs 2,075 kg (4,575 lb) unladen.
The Massey Ferguson MF 65 Mark-II has an independent rear PTO running at 540 rpm.
The three-point hitch of the Massey Ferguson MF 65 Mark-II lifts 1,134 kg (2,500 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson MF 65 Mark-II delivers 15.1 L/min (4.0 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 65 Mark II”
How much horsepower does an MF 65 Mark-II have?
The only figure for the MF 65 Mark-II is 57.3 hp (42.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 65 Mark II”
What engine is in an MF 65 Mark-II?
An MF 65 Mark-II has a Perkins AD 4.203, a 4-cylinder 3.34 L diesel engine.
| Make & model | Perkins AD 4.203 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 203.5 ci · 3.34 L |
| Max torque | 169 lb·ft · 228 N·m @ 1,260 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Eicher 3354 Mammut 74 A”
How much will an MF 65 Mark-II lift, and what is its hydraulic flow?
An MF 65 Mark-II lifts 2,500 lb (1,134 kg) at the lower-link ends.
| Pump flow | 4.0 gpm · 15.1 L/min |
|---|---|
| Pressure | 2,489 psi · 172 bar |
| Lift at ends | 2,500 lb · 1,134 kg |
| Rear PTO | Independent, engine-driven, 540 rpmGround-speed PTO available |
| PTO shaft | 29 x 34,9 x 9,7 mm (Form-1) |
Source · Traktorenlexikon, “Massey Ferguson MF 65 Mark II”
What transmission does an MF 65 Mark-II have?
Transmission specifications for the MF 65 Mark-II are below.
| Clutch | Pedal operated dry and air-cooled Laycock double clutch |
|---|---|
| Brakes | Pedal operated double disc brake acting on the half axles |
| Steering | Mechanical finger steering |
| Top speed | 12.4 mph · 20 km/h |
Source · Traktorenlexikon, “Massey Ferguson MF 65 Mark II”
How much does an MF 65 Mark-II weigh?
An MF 65 Mark-II weighs 4,575 lb (2,075 kg) unladen.
| Unladen weight | 4,575 lb · 2,075 kg |
|---|---|
| Wheelbase | 84.2 in · 2,138 mm |
| Length | 135.8 in · 3,450 mm |
| Width | 72.4 in · 1,840 mm |
| Height | 63.4 in · 1,610 mm |
| Ground clearance | 14.2 in · 360 mm |
| Front track | 48.0–79.9 in · 1,220–2,030 mm |
| Rear track | 52.0–79.9 in · 1,320–2,030 mm |
| Turning radius, braked | 11.5 ft · 3.50 m |
Source · Traktorenlexikon, “Massey Ferguson MF 65 Mark II”
Which tractors compare with an MF 65 Mark-II?
Within 10% of its 57.3 hp of claimed engine power, the same type, and first built within 15 years of it.
- International Harvester 47457.3 hp engine, claimed · 1973–1974Side by side with the MF 65 Mark-II →
- UTB Universal 60057.3 hp engine, claimed · from 1974Side by side with the MF 65 Mark-II →
- Fendt Farmer 10557.1 hp engine, claimed · 1972–1973Side by side with the MF 65 Mark-II →
- Schlüter Compact 550 (V)57.0 hp engine, claimed · 1972Side by side with the MF 65 Mark-II →
- J.I. Case 77056.2 hp engine, claimed · 1969–1973Side by side with the MF 65 Mark-II →
- Fahr D 54058.9 hp engine, claimed · 1955–1958Side by side with the MF 65 Mark-II →
Everything else people ask
Is an MF 65 Mark-II two-wheel drive or four-wheel drive?
The Massey Ferguson MF 65 Mark-II is two-wheel drive (2WD).
What PTO does an MF 65 Mark-II have?
An MF 65 Mark-II has a independent 540 rpm rear PTO on a 29 x 34,9 x 9,7 mm (Form-1) shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 65 Mark II”; and Traktorenlexikon, “Eicher 3354 Mammut 74 A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Eicher 3354 Mammut 74 A — CC BY-SA 4.0, WIKIBOOKS-TL-82323 · revision 1083153. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 65 Mark II — CC BY-SA 4.0, WIKIBOOKS-TL-104094 · revision 1089750. Wikibooks contributors (Traktorenlexikon). Original document