• WhichTractor size: Utility
  • Not independently tested
  • 1973–1974

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

International Harvester 474 Full specifications

INTERNATIONAL-HARVESTER D-206 four-cylinder diesel. The manufacturer claimed 57.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

57.3 hp

42.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IHC 474”, claimed

Weight
5,584 lb
3-point lift
3,946 lb
Hyd. flow
11.4–12.6 gpm
Top speed
15.5–18.6 mph

International Harvester 474 specs: key facts

  • The International Harvester 474 was built from 1973 to 1974.

  • The International Harvester 474 has a claimed engine power (gross or net not stated) of 42.7 kW (57.3 hp); it has no measured PTO figure.

  • The International Harvester 474 is two-wheel drive (2WD).Source 2

  • The International Harvester 474 has a INTERNATIONAL-HARVESTER D-206 engine, a 4-cylinder 3.38 L diesel unit.Source 3

  • The International Harvester 474 weighs 2,533 kg (5,584 lb) unladen.

  • The International Harvester 474 has an independent rear PTO running at 540/1000 rpm.Source 2

  • The three-point hitch of the International Harvester 474 lifts 1,790 kg (3,946 lb) at the lower-link ends.

  • The hydraulic pump of the International Harvester 474 delivers 43.1–47.7 L/min (11.4–12.6 gpm).

Source · Traktorenlexikon, “IHC 474”

How much horsepower does a 474 have?

The only figure for the 474 is 57.3 hp (42.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
57.3 hp

Source · Traktorenlexikon, “IHC 474”

What engine is in a 474?

A 474 has an INTERNATIONAL-HARVESTER D-206, a 4-cylinder 3.38 L diesel engine.

Engine — 474 engine specifications
Make & modelINTERNATIONAL-HARVESTER D-206Source 3
Cylinders4, liquid-cooledSource 3
Displacement206.4 ci · 3.38 LSource 3
Max torque156 lb·ft · 212 N·m
InjectionDirect injectionSource 2On record for 1 of 2 configurations
Electrical system12 V

Source · Traktorenlexikon, “IHC 474”

How much will a 474 lift, and what is its hydraulic flow?

A 474 lifts 3,946 lb (1,790 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 474 hydraulics and PTO specifications
Pump flow11.4–12.6 gpm · 43.1–47.7 L/min
Hitch categoryCategory 2
Lift at ends3,946 lb · 1,790 kg
Rear PTOIndependent, engine-driven, 540/1000 rpmSource 2Engages under load
PTO shaft1 3/8"- 6 splines and 21 splineSource 2On record for 1 of 2 configurations

Source · Traktorenlexikon, “IHC 474”

What transmission does a 474 have?

Transmission specifications for the 474 are below.

Transmission — 474 transmission specifications
ClutchPedal-operated dry LAYCOCK single-disc clutch
BrakesPedal-operated hydraulic wet disc brakes acting on planetary gear shaftsSource 2On record for 1 of 2 configurations
SteeringHydrostatic ROSS steering with synchronizing cylinder
Top speed15.5–18.6 mph · 25–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “IHC 474”

How much does a 474 weigh?

A 474 weighs 5,584 lb (2,533 kg) unladen.

Weights & dimensions — 474 weights and dimensions
Unladen weight5,584 lb · 2,533 kg
Wheelbase84.5 in · 2,146 mm
Length135.0 in · 3,430 mm
Width64.2 in · 1,630 mm
Height59.4 in · 1,510 mm
Ground clearance16.0 in · 406 mm
Front track52.0–80.0 in · 1,321–2,032 mm
Rear track52.0–76.0 in · 1,321–1,930 mm
Turning radius, braked9.0 ft · 2.74 m

Source · Traktorenlexikon, “IHC 474”

Which tractors compare with a 474?

Within 10% of its 57.3 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 474 two-wheel drive or four-wheel drive?

The International Harvester 474 is two-wheel drive (2WD).

What PTO does a 474 have?

A 474 has a independent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “McCormick 624 (A)”; Traktorenlexikon, “IHC 474”; and Traktorenlexikon, “IHC 474 (USA)”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IHC 474CC BY-SA 4.0, WIKIBOOKS-TL-118486 · revision 1028177. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: IHC 474 (USA)CC BY-SA 4.0, WIKIBOOKS-TL-118807 · revision 1034328. Wikibooks contributors (Traktorenlexikon). Original document
  3. Traktorenlexikon: McCormick 624 (A)CC BY-SA 4.0, WIKIBOOKS-TL-118083 · revision 1059860. Wikibooks contributors (Traktorenlexikon). Original document