• Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1997–2001

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 4225 (A) specs: hp, weight, years

Perkins 4.41 four-cylinder diesel. The manufacturer claimed 64.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

64.1 hp

47.8 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 4225”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
7,694 lb
3-point lift
5,401 lb
Top speed
18.6–24.9 mph

Massey Ferguson 4225 (A) specs: key facts

  • The Massey Ferguson 4225 (A) was built from 1997 to 2001.

  • The Massey Ferguson 4225 (A) has a claimed engine power (gross or net not stated) of 47.8 kW (64.1 hp); it has no measured PTO figure.

  • The Massey Ferguson 4225 (A) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 4225 (A) has a Perkins 4.41 engine, a 4-cylinder 4.08 L diesel unit.

  • The Massey Ferguson 4225 (A) weighs 3,490 kg (7,694 lb) unladen.

  • The Massey Ferguson 4225 (A) has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Massey Ferguson 4225 (A) lifts 2,450 kg (5,401 lb) at the lower-link ends.

Source · Traktorenlexikon, “Massey Ferguson MF 4225”

How does the 4225 (A) compare with its class?

  • Worth knowing:

    An unladen mass of 3,490 kg is high for its class — 25% above the median of 2,800 kg across the 395 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 395 comparable records. How we work this out

Illustration of the 1997–2001 Massey Ferguson MF 4225 (A), a 64 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 4225 (A) have?

The only figure for the 4225 (A) is 64.1 hp (47.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
64.1 hp

Source · Traktorenlexikon, “Massey Ferguson MF 4225”

What engine is in a 4225 (A)?

A 4225 (A) has a Perkins 4.41, a 4-cylinder 4.08 L diesel engine.

Engine — 4225 (A) engine specifications
Make & modelPerkins 4.41
Cylinders4, liquid-cooled
Displacement248.9 ci · 4.08 L
Electrical system12 V

Source · Traktorenlexikon, “Massey Ferguson MF 4225”

How much will a 4225 (A) lift?

A 4225 (A) lifts 5,401 lb (2,450 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 4225 (A) hydraulics and PTO specifications
SystemOpen centre
Hitch categoryCategory 2
Lift at ends5,401 lb · 2,450 kg
Rear PTO540/1000 rpm @ 1,902 engine rpm

Source · Traktorenlexikon, “Massey Ferguson MF 4225”

What transmission does a 4225 (A) have?

Transmission specifications for the 4225 (A) are below.

Transmission — 4225 (A) transmission specifications
ClutchPedal operated dry and air cooled single plate clutch
BrakesHydraulically operated wet Girling multiple disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering type Orbitrol-OSPC-100-ON with separate oil circuit
Top speed18.6–24.9 mph · 30–40 km/hthe article lists alternatives

Source · Traktorenlexikon, “Massey Ferguson MF 4225”

How much does a 4225 (A) weigh?

A 4225 (A) weighs 7,694 lb (3,490 kg) unladen.

Weights & dimensions — 4225 (A) weights and dimensions
Unladen weight7,694 lb · 3,490 kgtwo-wheel-drive version
Maximum permissible mass14,330 lb · 6,500 kg
Maximum front axle load6,173 lb · 2,800 kg
Maximum rear axle load11,023 lb · 5,000 kg
Wheelbase92.5 in · 2,350 mm
Length151.6 in · 3,850 mmtwo-wheel-drive version
Width78.3–102.0 in · 1,990–2,590 mm
Height97.2 in · 2,468 mm
Ground clearance10.6 in · 270 mm
Front track49.0–73.0 in · 1,245–1,855 mmtwo-wheel-drive version
Rear track60.4–83.9 in · 1,535–2,130 mm

Source · Traktorenlexikon, “Massey Ferguson MF 4225”

What oil does a 4225 (A) take, and how much?

A 4225 (A) engine takes 6.9 qt (6.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

4225 (A) fluid capacities, grades and service intervals
SystemCapacity
Engine oil6.9 qt · 6.5 LSource: Traktorenlexikon, “Massey Ferguson MF 4225” · single source, not independently verified
Hydraulic52.8 qt · 50.0 LSource: Traktorenlexikon, “Massey Ferguson MF 4225” · single source, not independently verified
Front axle7.4 qt · 7.0 LSource: Traktorenlexikon, “Massey Ferguson MF 4225” · single source, not independently verified
Cooling system18.5 qt · 17.5 LSource: Traktorenlexikon, “Massey Ferguson MF 4225” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 4225 (A)?

Within 10% of its 64.1 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 4225 (A)

Is a 4225 (A) two-wheel drive or four-wheel drive?

The Massey Ferguson 4225 (A) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 4225 (A) have?

A 4225 (A) has a 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 4225”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 4225 — CC BY-SA 4.0, WIKIBOOKS-TL-78666 · revision 992219. Wikibooks contributors (Traktorenlexikon). Original document