10 material differences · fewer than 12

Tractor oneFord 48351996–1998No measured PTO figureTractor twoMassey Ferguson MF 4225 (A)1997–2001No measured PTO figure

Which should you choose?

Read our verdict on the 4835 and the MF 4225 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Ford 4835 and Massey Ferguson MF 4225 (A), field by field
Field	4835	MF 4225 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Iveco 8045.06	Perkins 4.41	differs
Displacement declared	3.61 L	4.08 L	+13% MF 4225 (A)
Maximum torque declared	146 lb·ft · 198 N·m	—	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Dry LuK double clutch	Pedal operated dry and air cooled single plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	—	—
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift, at the coupling points declared	6,393 lb · 2,900 kg	5,401 lb · 2,450 kg	+18% 4835
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,620 lb · 3,910 kg	7,694 lb · 3,490 kg	+12% 4835
Maximum permissible mass declared	11,464 lb · 5,200 kg	14,330 lb · 6,500 kg	+25% MF 4225 (A)
Wheelbase declared	92.2 in · 2,342 mm	92.5 in · 2,350 mm	—
Length declared	153.9 in · 3,910 mm	151.6 in · 3,850 mm	—
Width declared	83.5–99.2 in · 2,120–2,520 mm	78.3–102.0 in · 1,990–2,590 mm	differs
Height, over the cab declared	98.4 in · 2,500 mm	97.2 in · 2,468 mm	—
Ground clearance declared	18.9 in · 480 mm	10.6 in · 270 mm	+78% 4835
Turning radius, braked declared	12.4 ft · 3.79 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	88.8 qt · 84.0 L	+37% 4835

Source

Source