10 material differences · fewer than 12

Tractor oneMassey Ferguson MF 4225 (A)1997–2001No measured PTO figureTractor twoNew Holland 4835 (A)1996–1998No measured PTO figure

Which should you choose?

Read our verdict on the MF 4225 (A) and the 4835 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 4225 (A) and New Holland 4835 (A), field by field
Field	MF 4225 (A)	4835 (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Perkins 4.41	Iveco 8045.06	differs
Displacement declared	4.08 L	3.61 L	+13% MF 4225 (A)
Maximum torque declared	—	146 lb·ft · 198 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry and air cooled single plate clutch	dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	11.8 gpm · 44.5 L/min	—
Pressure declared	—	2,103 psi · 145 bar	—
Three-point lift, at the coupling points declared	5,401 lb · 2,450 kg	6,393 lb · 2,900 kg	+18% 4835 (A)
Rear PTO speeds declared	540/1000 rpm	540/540E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	7,694 lb · 3,490 kg	8,620 lb · 3,910 kg	+12% 4835 (A)
Maximum permissible mass declared	14,330 lb · 6,500 kg	11,464 lb · 5,200 kg	+25% MF 4225 (A)
Wheelbase declared	92.5 in · 2,350 mm	92.2 in · 2,342 mm	—
Length declared	151.6 in · 3,850 mm	153.9 in · 3,910 mm	—
Width declared	78.3–102.0 in · 1,990–2,590 mm	83.5–99.2 in · 2,120–2,520 mm	differs
Height, over the cab declared	97.2 in · 2,468 mm	98.4 in · 2,500 mm	—
Ground clearance declared	10.6 in · 270 mm	18.9 in · 480 mm	+78% 4835 (A)
Turning radius, braked declared	—	12.4 ft · 3.79 m	—
Fuel tank declared	88.8 qt · 84.0 L	121.5 qt · 115.0 L	+37% 4835 (A)

Source

Source