- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1992–1997
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 362/II Full specifications
Perkins A 4.236 four-cylinder diesel. The manufacturer claimed 61.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
61.2 hp
45.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 362/II”, claimed
- Weight
- 6,063 lb
- 3-point lift
- 6,373 lb
- Hyd. flow
- 9.5 gpm
- Top speed
- 18.6–24.9 mph
Massey Ferguson MF 362/II specs: key facts
The Massey Ferguson MF 362/II was built from 1992 to 1997.
The Massey Ferguson MF 362/II has a claimed engine power (gross or net not stated) of 45.6 kW (61.2 hp); it has no measured PTO figure.
The Massey Ferguson MF 362/II was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Massey Ferguson MF 362/II has a Perkins A 4.236 engine, a 4-cylinder 3.87 L diesel unit.Source 1
The Massey Ferguson MF 362/II weighs 2,750 kg (6,063 lb) unladen.
The Massey Ferguson MF 362/II has an independent rear PTO running at 540/540E rpm.
The three-point hitch of the Massey Ferguson MF 362/II lifts 2,891 kg (6,373 lb) at the lower-link ends.
The hydraulic pump of the Massey Ferguson MF 362/II delivers 36.0 L/min (9.5 gpm).
Source · Traktorenlexikon, “Massey Ferguson MF 362/II”
How much horsepower does an MF 362/II have?
The only figure for the MF 362/II is 61.2 hp (45.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 362/II”
What engine is in an MF 362/II?
An MF 362/II has a Perkins A 4.236, a 4-cylinder 3.87 L diesel engine.
| Make & model | Perkins A 4.236 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 236.0 ci · 3.87 L |
| Max torque | 168 lb·ft · 228 N·m @ 1,300 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”
How much will an MF 362/II lift, and what is its hydraulic flow?
An MF 362/II lifts 6,373 lb (2,891 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 9.5 gpm · 36.0 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 6,373 lb · 2,891 kg |
| Rear PTO | Independent, engine-driven, 540/540E rpm @ 1,789 engine rpm |
| PTO shaft | 1 3/8" with 6 splines |
Source · Traktorenlexikon, “Massey Ferguson MF 362/II”
What transmission does an MF 362/II have?
Transmission specifications for the MF 362/II are below.
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
|---|
Source · Traktorenlexikon, “Massey Ferguson MF 362/II”
How much does an MF 362/II weigh?
An MF 362/II weighs 6,063 lb (2,750 kg) unladen.
| Unladen weight | 6,063 lb · 2,750 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 85.8 in · 2,180 mmtwo-wheel-drive version |
| Length | 153.9 in · 3,910 mm |
| Width | 79.9 in · 2,030 mm |
| Height | 97.6 in · 2,480 mm |
| Ground clearance | 15.7 in · 400 mmtwo-wheel-drive version |
| Rear track | 56.7–84.3 in · 1,440–2,140 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 362/II”
Which tractors compare with an MF 362/II?
Within 10% of its 44.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Massey Ferguson MF 362 (A)44.5 hp PTO, claimed · 1988–1996Side by side with the MF 362/II →
- Hürlimann H-356 (A)44.8 hp PTO, claimed · 1983–1986Side by side with the MF 362/II →
- Massey Ferguson MF 360 (A)44.8 hp PTO, claimed · 1987–1994Side by side with the MF 362/II →
- Fiat 55-66 (DT)44.8 hp PTO, claimed · 1985–1992Side by side with the MF 362/II →
- Fiat 55-66 V/F (DT-V/F)44.8 hp PTO, claimed · 1985–1992Side by side with the MF 362/II →
- Case-IH CS-48 (A)44.3 hp PTO, claimed · 1996–2001Side by side with the MF 362/II →
Everything else people ask
Is an MF 362/II two-wheel drive or four-wheel drive?
The Massey Ferguson MF 362/II was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an MF 362/II have?
An MF 362/II has a independent 540/540E rpm rear PTO on a 1 3/8" with 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 362/II”; and Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 168 & MF 168A — CC BY-SA 4.0, WIKIBOOKS-TL-69277 · revision 1065377. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 362/II — CC BY-SA 4.0, WIKIBOOKS-TL-104528 · revision 992169. Wikibooks contributors (Traktorenlexikon). Original document