7 material differences · fewer than 12

Tractor oneJohn Deere 1950 (A)1987–1994No measured PTO figureTractor twoMassey Ferguson MF 362/II1992–1997No measured PTO figure

Which should you choose?

Read our verdict on the 1950 (A) and the MF 362/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

John Deere 1950 (A) and Massey Ferguson MF 362/II, field by field
Field	1950 (A)	MF 362/II	Gap
Engine
Engine power, claimed claimed	61.2 hp	61.2 hp	—
Engine declared	John Deere 3.179 TL-001	Perkins A 4.236	differs
Displacement declared	2.94 L	3.87 L	+32% MF 362/II
Maximum torque declared	185 lb·ft · 251 N·m	168 lb·ft · 228 N·m	+10% 1950 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal operated dry Fichtel & Sachs single disc clutch as driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	Closed centre	—	—
Pump flow declared	13.3 gpm · 50.2 L/min	9.5 gpm · 36.0 L/min	+39% 1950 (A)
Pressure declared	3,336 psi · 230 bar	—	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/540E rpm	differs
Weight & dimensions
Unladen weight declared	6,151 lb · 2,790 kg	6,063 lb · 2,750 kg	—
Maximum permissible mass declared	9,259 lb · 4,200 kg	—	—
Wheelbase declared	84.7 in · 2,151 mm	85.8 in · 2,180 mm	—
Length declared	148.2 in · 3,764 mm	153.9 in · 3,910 mm	—
Width declared	73.0 in · 1,854 mm	79.9 in · 2,030 mm	+9% MF 362/II
Height, over the cab declared	95.8 in · 2,433 mm	97.6 in · 2,480 mm	—
Ground clearance declared	24.4 in · 621 mm	15.7 in · 400 mm	+55% 1950 (A)
Turning radius, braked declared	10.8 ft · 3.29 m	—	—
Fuel tank declared	76.1 qt · 72.0 L	79.3 qt · 75.0 L	—

Source

Source