7 material differences · fewer than 12
Tractor oneJohn Deere 2250 (A)1986–1994No measured PTO figureTractor twoMassey Ferguson MF 362/II1992–1997No measured PTO figure
Which should you choose?
Read our verdict on the 2250 (A) and the MF 362/II → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 2250 (A) | MF 362/II | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 61.2 hp | 61.2 hp | — |
| Engine declared | John Deere 4.239 DL-009 | Perkins A 4.236 | differs |
| Displacement declared | 3.92 L | 3.87 L | — |
| Maximum torque declared | 164 lb·ft · 222 N·m | 168 lb·ft · 228 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Closed centre | — | — |
| Pump flow declared | 13.9 gpm · 52.7 L/min | 9.5 gpm · 36.0 L/min | +46% 2250 (A) |
| Pressure declared | 3,336 psi · 230 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,724 lb · 3,050 kg | 6,063 lb · 2,750 kg | +11% 2250 (A) |
| Maximum permissible mass declared | 10,582 lb · 4,800 kg | — | — |
| Wheelbase declared | 89.2 in · 2,266 mm | 85.8 in · 2,180 mm | — |
| Length declared | 165.1 in · 4,193 mm | 153.9 in · 3,910 mm | +7% 2250 (A) |
| Width declared | 79.9 in · 2,029 mm | 79.9 in · 2,030 mm | — |
| Ground clearance declared | 25.3 in · 642 mm | 15.7 in · 400 mm | +61% 2250 (A) |
| Fuel tank declared | 88.8–143.7 qt · 84.0–136.0 L | 79.3 qt · 75.0 L | differs |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere 2250 (A) sources
- Source: Traktorenlexikon, “John Deere 2250”
Massey Ferguson MF 362/II sources
- Source: Traktorenlexikon, “Massey Ferguson MF 362/II”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”