WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1980–1985

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Massey Ferguson 2680 specs: hp, weight, years

Perkins AT 6.354.4 six-cylinder diesel. The manufacturer claimed 118.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

118.4 hp

88.3 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Massey Ferguson MF 2680”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
11,883 lb
3-point lift
11,464 lb
Hyd. flow
14.1 gpm
Top speed
18.6 mph

Massey Ferguson 2680 specs: key facts

  • The Massey Ferguson 2680 was built from 1980 to 1985.

  • The Massey Ferguson 2680 has a claimed engine power (gross or net not stated) of 88.3 kW (118.4 hp); it has no measured PTO figure.

  • The Massey Ferguson 2680 was offered in two-wheel-drive and four-wheel-drive versions.

  • The Massey Ferguson 2680 has a Perkins AT 6.354.4 engine, a 6-cylinder 5.80 L diesel unit.Source 1

  • The Massey Ferguson 2680 weighs 5,390 kg (11,883 lb) unladen.

  • The Massey Ferguson 2680 has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Massey Ferguson 2680 lifts 5,200 kg (11,464 lb) at the lower-link ends.

  • The hydraulic pump of the Massey Ferguson 2680 delivers 53.3 L/min (14.1 gpm).

Source · Traktorenlexikon, “Massey Ferguson MF 2680”

How does the 2680 compare with its class?

  • Limitation:

    The power figure is a manufacturer claim, not a measurement. No laboratory test report exists for this machine. Of the 284 tractors within 10% of its power, 12% carry one.

Derived by WhichTractor from 284 comparable records. How we work this out

Illustration of the 1980–1985 Massey Ferguson MF 2680, a 118 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 2680 have?

The only figure for the 2680 is 118.4 hp (88.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
118.4 hp

Source · Traktorenlexikon, “Massey Ferguson MF 2680”

What engine is in a 2680?

A 2680 has a Perkins AT 6.354.4, a 6-cylinder 5.80 L diesel engine.

Engine — 2680 engine specifications
Make & modelPerkins AT 6.354.4
Cylinders6, liquid-cooledSource 2
Displacement353.9 ci · 5.80 L

Source · Traktorenlexikon, “Massey Ferguson MF 1134”

How much will a 2680 lift, and what is its hydraulic flow?

A 2680 lifts 11,464 lb (5,200 kg) at the lower-link ends.

Hydraulics & PTO — 2680 hydraulics and PTO specifications
Pump flow14.1 gpm · 53.3 L/min
Lift at ends11,464 lb · 5,200 kg
Rear PTOIndependent, engine-driven, 540/1000 rpmEngages under load

Source · Traktorenlexikon, “Massey Ferguson MF 2680”

What transmission does a 2680 have?

Transmission specifications for the 2680 are below.

Transmission — 2680 transmission specifications
BrakesHydraulically operated wet disc brake acting on differential side shafts
SteeringHydrostatic Danfoss steering with height and tilt adjustable steering wheel
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Massey Ferguson MF 2680”

How much does a 2680 weigh?

A 2680 weighs 11,883 lb (5,390 kg) unladen.

Weights & dimensions — 2680 weights and dimensions
Unladen weight11,883 lb · 5,390 kgtwo-wheel-drive version
Maximum permissible mass16,535 lb · 7,500 kg
Wheelbase107.3 in · 2,726 mm
Length185.0 in · 4,700 mm
Width90.6 in · 2,300 mm
Height111.4 in · 2,830 mm
Ground clearance18.9 in · 480 mm
Front track63.0–81.5 in · 1,600–2,070 mm
Rear track71.7–79.5 in · 1,820–2,020 mm

Source · Traktorenlexikon, “Massey Ferguson MF 2680”

What oil does a 2680 take, and how much?

A 2680 engine takes 21.7 qt (20.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

2680 fluid capacities, grades and service intervals
SystemCapacity
Engine oil21.7 qt · 20.5 LSource: Traktorenlexikon, “Massey Ferguson MF 2680” · single source, not independently verified
Transmission89.8 qt · 85.0 LSource: Traktorenlexikon, “Massey Ferguson MF 2680” · single source, not independently verified
Front axle18.6 qt · 17.6 LSource: Traktorenlexikon, “Massey Ferguson MF 2680” · single source, not independently verified
Cooling system28.5 qt · 27.0 LSource: Traktorenlexikon, “Massey Ferguson MF 2680” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 2680?

Within 10% of its 118.4 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Massey Ferguson 2680

Is a 2680 two-wheel drive or four-wheel drive?

The Massey Ferguson 2680 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 2680 have?

A 2680 has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Massey Ferguson MF 1134”; and Traktorenlexikon, “Massey Ferguson MF 2680”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Massey Ferguson MF 1134 — CC BY-SA 4.0, WIKIBOOKS-TL-87006 · revision 992152. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Massey Ferguson MF 2680 — CC BY-SA 4.0, WIKIBOOKS-TL-87017 · revision 992142. Wikibooks contributors (Traktorenlexikon). Original document