8 material differences · fewer than 12
Tractor oneMassey Ferguson MF 26801980–1985No measured PTO figureTractor twoVALMET 81001990–1996No measured PTO figure
Which should you choose?
Read our verdict on the MF 2680 and the 8100 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | MF 2680 | 8100 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 118.4 hp | 118.4 hp | — |
| Engine declared | Perkins AT 6.354.4 | VALMET 620 D | differs |
| Displacement declared | 5.80 L | 6.59 L | +14% 8100 |
| Maximum torque declared | — | 311 lb·ft · 421 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Pedal-operated dry Fichtel & Sachs single-plate clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 14.1 gpm · 53.3 L/min | 17.8 gpm · 67.4 L/min | +26% 8100 |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,883 lb · 5,390 kg | 10,141 lb · 4,600 kg | +17% MF 2680 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | 16,535 lb · 7,500 kg | — |
| Wheelbase declared | 107.3 in · 2,726 mm | 100.7 in · 2,558 mm | +7% MF 2680 |
| Length declared | 185.0 in · 4,700 mm | 186.8 in · 4,745 mm | — |
| Width declared | 90.6 in · 2,300 mm | 86.6–103.9 in · 2,200–2,640 mm | differs |
| Ground clearance declared | 18.9 in · 480 mm | 18.7 in · 475 mm | — |
| Turning radius, braked declared | — | 15.5 ft · 4.71 m | — |
| Fuel tank declared | 240.9 qt · 228.0 L | 174.4 qt · 165.0 L | +38% MF 2680 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 2680 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 2680”
- Source: Traktorenlexikon, “Massey Ferguson MF 1134”
VALMET 8100 sources
- Source: Traktorenlexikon, “Valmet 8100”
- Source: Traktorenlexikon, “Valmet 8000”