- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1987–2000
WhichTractor size, not the maker’s category
Landini 9800 (DT) Hydraulics & PTO specifications
14 hydraulics and PTO values on record for the 9800 (DT).
Engine power, claimed · gross or net not stated
88.8 hp
66.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Landini 9800 DT”, claimed
How much will a 9800 (DT) lift?
A 9800 (DT) lifts 10,296 lb (4,670 kg) at the lower-link ends.
| Pump flow | 13.5 gpm · 51.1 L/min |
|---|---|
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves, optional | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 10,296 lb · 4,670 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Landini 9800 DT”
What PTO does a 9800 (DT) have?
A 9800 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,980 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 part |
| Front PTO available, optional | Yes |
| PTO power, claimed | 77.8 hp · 58.0 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Landini 9800 DT”
Where this page comes from
14 hydraulics and PTO values from Traktorenlexikon, “Landini 9800 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Landini 9800 DT — CC BY-SA 4.0, WIKIBOOKS-TL-113033 · revision 991554. Wikibooks contributors (Traktorenlexikon). Original document