• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1958–1960
  • 29,713 built

It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

John Deere 730 Full specifications

The manufacturer claimed 53.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

53.2 hp

39.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere Modell 730”, claimed

Weight
7,381 lb
Hyd. flow
8.9 gpm
Top speed
11.8 mph

John Deere 730 specs: key facts

  • The John Deere 730 was built from 1958 to 1960.

  • The John Deere 730 has a claimed engine power (gross or net not stated) of 39.7 kW (53.2 hp); it has no measured PTO figure.

  • The John Deere 730 is two-wheel drive (2WD).

  • The John Deere 730 weighs 3,348 kg (7,381 lb) unladen.

  • The John Deere 730 has an independent rear PTO running at 547 rpm.

  • The hydraulic pump of the John Deere 730 delivers 33.7 L/min (8.9 gpm).

Source · Traktorenlexikon, “John Deere Modell 730”

How much horsepower does a 730 have?

The only figure for the 730 is 53.2 hp (39.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
53.2 hp

Source · Traktorenlexikon, “John Deere Modell 730”

How much will a 730 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 730 are below.

Hydraulics & PTO — 730 hydraulics and PTO specifications
Pump flow8.9 gpm · 33.7 L/min
Rear PTOIndependent, 547 rpm

Source · Traktorenlexikon, “John Deere Modell 730”

What transmission does a 730 have?

Transmission specifications for the 730 are below.

Transmission — 730 transmission specifications
ClutchHand lever operated dry six-plate multi-disc clutch
SteeringPower steering
Top speed11.8 mph · 19.0 km/h

Source · Traktorenlexikon, “John Deere Modell 730”

How much does a 730 weigh?

A 730 weighs 7,381 lb (3,348 kg) unladen.

Weights & dimensions — 730 weights and dimensions
Unladen weight7,381 lb · 3,348 kgRC: 3,080
Wheelbase82.4 in · 2,092 mmRC: 2,321
Length130.2 in · 3,308 mmRC: 3,435
Width86.6 in · 2,200 mm
Height79.4 in · 2,016 mm
Ground clearance13.0 in · 330 mmRC: 660
Front track52.0–68.0 in · 1,321–1,727 mmRC: 211/306; the article lists alternatives
Rear track62.0–80.0 in · 1,575–2,032 mmRC: 1,524-2,235
Turning radius, braked14.0 ft · 4.27 mRC: 2,896

Source · Traktorenlexikon, “John Deere Modell 730”

Which tractors compare with a 730?

Within 10% of its 53.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 730 two-wheel drive or four-wheel drive?

The John Deere 730 is two-wheel drive (2WD).

What PTO does a 730 have?

A 730 has a independent 547 rpm rear PTO.

What serial numbers does a 730 carry?

The first 730 HIGH-CROP was serial number 7300080, built 5 August 1958. It does not say whether that is the tractor’s or the engine’s number, and we never work out a year from a serial number.

Where this page comes from

Compiled from Traktorenlexikon, “John Deere Modell 730”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: John Deere Modell 730CC BY-SA 4.0, WIKIBOOKS-TL-82049 · revision 1017932. Wikibooks contributors (Traktorenlexikon). Original document