1 material differences · fewer than 12

Tractor oneJohn Deere Modell 7201956–1958No measured PTO figureTractor twoJohn Deere 7301958–1960No measured PTO figure

Which should you choose?

Read our verdict on the Modell 720 and the 730 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

1 material differences · 9 fields identical or within 5%, which is not counted as material

John Deere Modell 720 and John Deere 730, field by field
FieldModell 720730Gap
Engine
Engine power, claimed claimed53.2 hp53.2 hp—
Maximum torque declared90 lb·ft · 122 N·m——
Transmission
Top speed declared11.8 mph · 19 km/h11.8 mph · 19.0 km/h—
Clutch declared—Hand lever operated dry six-plate multi-disc clutch—
Hydraulics & hitch
Pump flow declared8.9 gpm · 33.7 L/min8.9 gpm · 33.7 L/min—
Rear PTO speeds declared547 rpm547 rpm—
Weight & dimensions
Unladen weight declared6,790 lb · 3,080 kg7,381 lb · 3,348 kg+9% 730
Wheelbase declared82.4 in · 2,092 mm82.4 in · 2,092 mm—
Length declared130.2 in · 3,308 mm130.2 in · 3,308 mm—
Width declared86.6 in · 2,200 mm86.6 in · 2,200 mm—
Ground clearance declared13.0 in · 330 mm13.0 in · 330 mm—
Turning radius, braked declared14.0 ft · 4.27 m14.0 ft · 4.27 m—
Fuel tank declared132.0 qt · 124.9 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

John Deere Modell 720 sources

Source
  • Source: Traktorenlexikon, “John Deere Modell 720”

John Deere 730 sources

Source
  • Source: Traktorenlexikon, “John Deere Modell 730”