Ford 3055 (A) vs John Deere 730
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 3055 (A) and the 730 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 3055 (A) | 730 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | Ford 182 DF | — | — |
| Displacement declared | 3.00 L | — | — |
| Maximum torque declared | 139 lb·ft · 188 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4–15.5 mph · 20–25 km/h | 11.8 mph · 19.0 km/h | differs |
| Clutch declared | Pedal-operated dry single-plate clutch | Hand lever operated dry six-plate multi-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.9 gpm · 33.7 L/min | — |
| Three-point lift at ends declared | 2,800 lb · 1,270 kg | — | — |
| Rear PTO speeds declared | 540 rpm | 547 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,224 lb · 1,916 kg | 7,381 lb · 3,348 kg | +75% 730 |
| Wheelbase declared | 77.2 in · 1,960 mm | 82.4 in · 2,092 mm | +7% 730 |
| Length declared | 135.0 in · 3,430 mm | 130.2 in · 3,308 mm | — |
| Width declared | 72.0 in · 1,830 mm | 86.6 in · 2,200 mm | +20% 730 |
| Height declared | 93.3 in · 2,370 mm | 79.4 in · 2,016 mm | +18% 3055 (A) |
| Ground clearance declared | 19.5 in · 495 mm | 13.0 in · 330 mm | +50% 3055 (A) |
| Turning radius, braked declared | — | 14.0 ft · 4.27 m | — |
| Fuel tank declared | 51.8 qt · 49 L | — | — |
Ford 3055 (A) sources
Source
- Source: Traktorenlexikon, “Ford 3055”
John Deere 730 sources
Source
- Source: Traktorenlexikon, “John Deere Modell 730”