• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1956–1958
  • 27,573 built

It sits on the standard-size/high-power boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

John Deere Modell 720 Full specifications

The manufacturer claimed 53.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

53.2 hp

39.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere Modell 720”, claimed

Weight
6,790 lb
Hyd. flow
8.9 gpm
Top speed
11.8 mph

John Deere Modell 720 specs: key facts

  • The John Deere Modell 720 was built from 1956 to 1958.

  • The John Deere Modell 720 has a claimed engine power (gross or net not stated) of 39.7 kW (53.2 hp); it has no measured PTO figure.

  • The John Deere Modell 720 is two-wheel drive (2WD).

  • The John Deere Modell 720 weighs 3,080 kg (6,790 lb) unladen.

  • The John Deere Modell 720 has a rear PTO running at 547 rpm.

  • The hydraulic pump of the John Deere Modell 720 delivers 33.7 L/min (8.9 gpm).

Source · Traktorenlexikon, “John Deere Modell 720”

How much horsepower does a Modell 720 have?

The only figure for the Modell 720 is 53.2 hp (39.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
53.2 hp

Source · Traktorenlexikon, “John Deere Modell 720”

How much will a Modell 720 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the Modell 720 are below.

Hydraulics & PTO — Modell 720 hydraulics and PTO specifications
Pump flow8.9 gpm · 33.7 L/min
Rear PTO547 rpm

Source · Traktorenlexikon, “John Deere Modell 720”

What transmission does a Modell 720 have?

Transmission specifications for the Modell 720 are below.

Transmission — Modell 720 transmission specifications
Steeringpower steering
Top speed11.8 mph · 19 km/h

Source · Traktorenlexikon, “John Deere Modell 720”

How much does a Modell 720 weigh?

A Modell 720 weighs 6,790 lb (3,080 kg) unladen.

Weights & dimensions — Modell 720 weights and dimensions
Unladen weight6,790 lb · 3,080 kg
Wheelbase82.4 in · 2,092 mmRC: 2,321
Length130.2 in · 3,308 mmRC: 3,435
Width86.6 in · 2,200 mm
Height88.3 in · 2,242 mm
Ground clearance13.0 in · 330 mmRC: 660
Front track48.0–68.0 in · 1,219–1,727 mmRC: 211/306; the article lists alternatives
Rear track62.0–80.0 in · 1,575–2,032 mmRC: 1,524-2,235
Turning radius, braked14.0 ft · 4.27 mRC: 2,896

Source · Traktorenlexikon, “John Deere Modell 720”

Which tractors compare with a Modell 720?

Within 10% of its 53.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a Modell 720 two-wheel drive or four-wheel drive?

The John Deere Modell 720 is two-wheel drive (2WD).

What PTO does a Modell 720 have?

A Modell 720 has a 547 rpm rear PTO.

What serial numbers does a Modell 720 carry?

The first 720 was serial number 7200000, built 12 July 1956. It does not say whether that is the tractor’s or the engine’s number, and we never work out a year from a serial number.

Where this page comes from

Compiled from Traktorenlexikon, “John Deere Modell 720”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: John Deere Modell 720CC BY-SA 4.0, WIKIBOOKS-TL-81769 · revision 1033313. Wikibooks contributors (Traktorenlexikon). Original document