9 material differences · fewer than 12
Tractor oneJohn Deere Modell 7201956–1958No measured PTO figureTractor twoMassey Ferguson MF 1551969–1976No measured PTO figure
Which should you choose?
Read our verdict on the Modell 720 and the MF 155 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Modell 720 | MF 155 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | — | Perkins AD 4.203 | — |
| Displacement declared | — | 3.34 L | — |
| Maximum torque declared | 90 lb·ft · 122 N·m | 153 lb·ft · 208 N·m | +70% MF 155 |
| Transmission | |||
| Top speed declared | 11.8 mph · 19 km/h | 12.4 mph · 20 km/h | +5% MF 155 |
| Clutch declared | — | Pedal operated dry and air-cooled MF double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.9 gpm · 33.7 L/min | 4.3 gpm · 16.4 L/min | +105% Modell 720 |
| Pressure declared | — | 3,001 psi · 207 bar | — |
| Rear PTO speeds declared | 547 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,790 lb · 3,080 kg | 4,850 lb · 2,200 kg | +40% Modell 720 |
| Wheelbase declared | 82.4 in · 2,092 mm | 78.3 in · 1,990 mm | — |
| Length declared | 130.2 in · 3,308 mm | 129.5 in · 3,290 mm | — |
| Width declared | 86.6 in · 2,200 mm | 72.4 in · 1,840 mm | +20% Modell 720 |
| Ground clearance declared | 13.0 in · 330 mm | 15.4 in · 390 mm | +18% MF 155 |
| Turning radius, braked declared | 14.0 ft · 4.27 m | 9.4 ft · 2.87 m | +49% Modell 720 |
| Fuel tank declared | 132.0 qt · 124.9 L | 71.9 qt · 68.0 L | +84% Modell 720 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
John Deere Modell 720 sources
- Source: Traktorenlexikon, “John Deere Modell 720”
Massey Ferguson MF 155 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 155”
- Source: Traktorenlexikon, “Eicher 3354 Mammut 74 A”