- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1960–1969
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
J.I. Case 741 Full specifications
The manufacturer claimed 57.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
57.9 hp
43.2 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 741”, claimed
- Weight
- 6,916 lb
- Hyd. flow
- 15.6 gpm
- Top speed
- 18.6 mph
J.I. Case 741 specs: key facts
The J.I. Case 741 was built from 1960 to 1969.
The J.I. Case 741 has a claimed engine power (gross or net not stated) of 43.2 kW (57.9 hp); it has no measured PTO figure.
The J.I. Case 741 is two-wheel drive (2WD).
The J.I. Case 741 weighs 3,137 kg (6,916 lb) unladen.
The J.I. Case 741 has an independent rear PTO running at 540/1000 rpm.
The hydraulic pump of the J.I. Case 741 delivers 59.0 L/min (15.6 gpm).
Source · Traktorenlexikon, “Case 741”
How much horsepower does a 741 have?
The only figure for the 741 is 57.9 hp (43.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 741”
How much will a 741 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the 741 are below.
| Pump flow | 15.6 gpm · 59.0 L/min |
|---|---|
| Hitch category | Category 1 |
| Rear PTO | Independent, engine-driven, 540/1000 rpm |
Source · Traktorenlexikon, “Case 741”
What transmission does a 741 have?
Transmission specifications for the 741 are below.
| Steering | Mechanical steering with ball head suspension incl. hydraulic power assistance |
|---|---|
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Case 741”
How much does a 741 weigh?
A 741 weighs 6,916 lb (3,137 kg) unladen.
| Unladen weight | 6,916 lb · 3,137 kgLPG: 3,196 |
|---|---|
| Wheelbase | 101.7 in · 2,584 mm |
| Length | 143.4 in · 3,642 mm |
| Width | 85.2 in · 2,165 mm |
| Height | 65.9 in · 1,674 mm |
| Ground clearance | 20.0 in · 508 mm |
| Rear track | 52.0–88.0 in · 1,321–2,235 mm |
| Turning radius, braked | 11.9 ft · 3.63 m |
Source · Traktorenlexikon, “Case 741”
Which tractors compare with a 741?
Within 10% of its 57.1 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Fahr D 60 L57 hp PTO, claimed · 1952–1955Side by side with the 741 →
- SOMECA 640 (TD)57.2 hp PTO, claimed · 1973–1982Side by side with the 741 →
- John Deere 2120 (A)57.0 hp PTO, claimed · 1968–1972Side by side with the 741 →
- Ford 5600 (A)57.0 hp PTO, claimed · 1975–1981Side by side with the 741 →
- International Harvester 74457.3 hp PTO, claimed · 1974–1980Side by side with the 741 →
- Massey Ferguson MF 275 (A)56.9 hp PTO, claimed · 1975–1983Side by side with the 741 →
Everything else people ask
Is a 741 two-wheel drive or four-wheel drive?
The J.I. Case 741 is two-wheel drive (2WD).
What PTO does a 741 have?
A 741 has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Case 741”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 741 — CC BY-SA 4.0, WIKIBOOKS-TL-115317 · revision 989852. Wikibooks contributors (Traktorenlexikon). Original document