J.I. Case 741 vs Massey Ferguson MF 275 (A)

9 material differences · fewer than 12

Tractor one

1960–1969

No measured PTO figure

Tractor two

1975–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 741 and the MF 275 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 2 fields identical or within 5%, which is not counted as material

J.I. Case 741 and Massey Ferguson MF 275 (A), field by field
Field	741	MF 275 (A)	Gap
Engine
Engine power, claimed claimed	57.9 hp	65.2 hp	+12% MF 275 (A)
Engine declared	—	Perkins A 4.236 UA	—
Displacement declared	—	3.86 L	—
Maximum torque declared	—	198 lb·ft · 268.8 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	15.5 mph · 25 km/h	+20% 741
Clutch declared	—	pedal-operated dry and air-cooled single clutch	—
Hydraulics & hitch
Pump flow declared	15.6 gpm · 59.0 L/min	7.0 gpm · 26.5 L/min	+123% 741
Three-point lift at ends declared	—	4,630 lb · 2,100 kg	—
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,916 lb · 3,137 kg	6,283 lb · 2,850 kg	+10% 741
Wheelbase declared	101.7 in · 2,584 mm	88.5 in · 2,248 mm	+15% 741
Length declared	143.4 in · 3,642 mm	149.0 in · 3,785 mm	—
Width declared	85.2 in · 2,165 mm	73.2 in · 1,860 mm	+16% 741
Height declared	65.9 in · 1,674 mm	97.6 in · 2,480 mm	+48% MF 275 (A)
Ground clearance declared	20.0 in · 508 mm	16.1 in · 410 mm	+24% 741
Turning radius, braked declared	11.9 ft · 3.63 m	12.3 ft · 3.76 m	—
Fuel tank declared	69.2 qt · 65.5 L	84.5 qt · 80 L	+22% MF 275 (A)

Source

Source