• Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1979–1983

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 4690 Full specifications

CASE A-504 BDTL six-cylinder diesel. The manufacturer claimed 257 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

257 hp

192 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 4690”, claimed

Weight
22,311 lb
Hyd. flow
15.5 gpm
Top speed
18.6 mph

J.I. Case 4690 specs: key facts

  • The J.I. Case 4690 was built from 1979 to 1983.

  • The J.I. Case 4690 has a claimed engine power (gross or net not stated) of 192 kW (257 hp); it has no measured PTO figure.

  • The J.I. Case 4690 is four-wheel drive (4WD).

  • The J.I. Case 4690 has a CASE A-504 BDTL engine, a 6-cylinder 8.26 L diesel unit.

  • The J.I. Case 4690 weighs 10,120 kg (22,311 lb) unladen.

  • The J.I. Case 4690 has an independent rear PTO running at 1000 rpm.

  • The hydraulic pump of the J.I. Case 4690 delivers 58.7 L/min (15.5 gpm).

Source · Traktorenlexikon, “Case 4690”

How much horsepower does a 4690 have?

The only figure for the 4690 is 257 hp (192 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
257 hp

Source · Traktorenlexikon, “Case 4690”

What engine is in a 4690?

A 4690 has a CASE A-504 BDTL, a 6-cylinder 8.26 L diesel engine.

Engine — 4690 engine specifications
Make & modelCASE A-504 BDTL
Cylinders6, liquid-cooled
Displacement504.2 ci · 8.26 L
Electrical system12 V

Source · Traktorenlexikon, “Case 4690”

How much will a 4690 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 4690 are below.

Hydraulics & PTO — 4690 hydraulics and PTO specifications
Pump flow15.5 gpm · 58.7 L/min
Hitch categoryCategory 3
Rear PTOIndependent, engine-driven, 1000 rpm

Source · Traktorenlexikon, “Case 4690”

What transmission does a 4690 have?

Transmission specifications for the 4690 are below.

Transmission — 4690 transmission specifications
ClutchHydraulically operated wet disc clutch
BrakesPedal-operated hydraulic disc brake acting on differential side shafts
SteeringHydraulic front and electro-hydraulic rear steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case 4690”

How much does a 4690 weigh?

A 4690 weighs 22,311 lb (10,120 kg) unladen.

Weights & dimensions — 4690 weights and dimensions
Unladen weight22,311 lb · 10,120 kg
Wheelbase102.0 in · 2,591 mm
Length232.0 in · 5,893 mm
Width96.0 in · 2,438 mm
Ground clearance18.5 in · 470 mm
Front track76.0–139.0 in · 1,930–3,530 mmWikibooks gives one track for both axles; the article lists alternatives
Rear track76.0–139.0 in · 1,930–3,530 mmWikibooks gives one track for both axles; the article lists alternatives

Source · Traktorenlexikon, “Case 4690”

Which tractors compare with a 4690?

Within 10% of its 219.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 4690 two-wheel drive or four-wheel drive?

The J.I. Case 4690 is four-wheel drive (4WD).

What PTO does a 4690 have?

A 4690 has a independent 1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Case 4690”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 4690CC BY-SA 4.0, WIKIBOOKS-TL-115412 · revision 989878. Wikibooks contributors (Traktorenlexikon). Original document