- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1990–1993
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-IH 7150 Magnum Full specifications
CUMMINS 6 TA-830 six-cylinder diesel. The manufacturer claimed 244 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
244 hp
182 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 7150”, claimed
- Weight
- 18,587 lb
- 3-point lift
- 15,961 lb
- Hyd. flow
- 24.8 gpm
- Top speed
- 18.6 mph
Case-IH 7150 Magnum specs: key facts
The Case-IH 7150 Magnum was built from 1990 to 1993.
The Case-IH 7150 Magnum has a claimed engine power (gross or net not stated) of 182 kW (244 hp); it has no measured PTO figure.
The Case-IH 7150 Magnum is four-wheel drive (4WD).
The Case-IH 7150 Magnum has a CUMMINS 6 TA-830 engine, a 6-cylinder 8.27 L diesel unit.Source 2
The Case-IH 7150 Magnum weighs 8,431 kg (18,587 lb) unladen.
The Case-IH 7150 Magnum has an independent rear PTO running at 1000 rpm.
The three-point hitch of the Case-IH 7150 Magnum lifts 7,240 kg (15,961 lb) at the lower-link ends.
The hydraulic pump of the Case-IH 7150 Magnum delivers 93.8 L/min (24.8 gpm).
Source · Traktorenlexikon, “Case-IH 7150”
How much horsepower does a 7150 Magnum have?
The only figure for the 7150 Magnum is 244 hp (182 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case-IH 7150”
What engine is in a 7150 Magnum?
A 7150 Magnum has a CUMMINS 6 TA-830, a 6-cylinder 8.27 L diesel engine.
| Make & model | CUMMINS 6 TA-830Source 2 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 504.5 ci · 8.27 LSource 2 |
| Max torque | 691 lb·ft · 937 N·m @ 1,556 rpm |
| Injection | direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case-IH 7150”
How much will a 7150 Magnum lift, and what is its hydraulic flow?
A 7150 Magnum lifts 15,961 lb (7,240 kg) at the lower-link ends of its Category 3 three-point hitch.
| Pump flow | 24.8 gpm · 93.8 L/min |
|---|---|
| Pressure | 2,451 psi · 169 bar |
| Hitch category | Category 3 |
| Lift at ends | 15,961 lb · 7,240 kg |
| Rear PTO | Independent, engine-driven, 1000 rpmEngages under load |
| PTO shaft | 1 3/4"- 20 teilig |
Source · Traktorenlexikon, “Case-IH 7150”
What transmission does a 7150 Magnum have?
Transmission specifications for the 7150 Magnum are below.
| Clutch | oil-immersed multi-plate clutch |
|---|---|
| Brakes | pedal-operated hydraulic solid disc brake designed as individual wheel brake |
| Steering | hydrostatic Eaton steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Case-IH 7150”
How much does a 7150 Magnum weigh?
A 7150 Magnum weighs 18,587 lb (8,431 kg) unladen.
| Unladen weight | 18,587 lb · 8,431 kg |
|---|---|
| Maximum permissible mass | 25,519 lb · 11,575 kg |
| Maximum front axle load | 9,921 lb · 4,500 kg |
| Maximum rear axle load | 17,086 lb · 7,750 kg |
| Wheelbase | 118.3 in · 3,006 mm |
| Length | 207.8 in · 5,278 mm |
| Width | 120.0 in · 3,048 mm |
| Height | 121.1 in · 3,077 mm |
| Ground clearance | 17.3 in · 440 mm |
| Front track | 60.1–94.8 in · 1,527–2,408 mm |
| Rear track | 64.0–155.6 in · 1,626–3,953 mm |
Source · Traktorenlexikon, “Case-IH 7150”
Which tractors compare with a 7150 Magnum?
Within 10% of its 216.83 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Case-IH 7250 Magnum216.8 hp PTO, claimed · 1994–1997Side by side with the 7150 Magnum →
- John Deere 8210 T216.3 hp PTO, claimed · 2000–2002Side by side with the 7150 Magnum →
- John Deere 8220 T216.3 hp PTO, claimed · 2002–2005Side by side with the 7150 Magnum →
- John Deere 8320218.52 hp PTO, claimed · 2002–2005Side by side with the 7150 Magnum →
- J.I. Case 4694219.0 hp PTO, claimed · 1984–1985Side by side with the 7150 Magnum →
- Massey Ferguson MF 8170 A214.6 hp PTO, claimed · 1998–1999Side by side with the 7150 Magnum →
Everything else people ask
Is a 7150 Magnum two-wheel drive or four-wheel drive?
The Case-IH 7150 Magnum is four-wheel drive (4WD).
What PTO does a 7150 Magnum have?
A 7150 Magnum has a independent 1000 rpm rear PTO on a 1 3/4"- 20 teilig shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Case-IH 7150”; and Traktorenlexikon, “Case-IH 7230 PRO/8930”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 7150 — CC BY-SA 4.0, WIKIBOOKS-TL-115876 · revision 986034. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Case-IH 7230 PRO/8930 — CC BY-SA 4.0, WIKIBOOKS-TL-90517 · revision 977810. Wikibooks contributors (Traktorenlexikon). Original document