- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1994–1997
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-IH 7250 Magnum Full specifications
CUMMINS 6 TA-830 six-cylinder diesel. The manufacturer claimed 245.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
245.5 hp
183.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 7250”, claimed
- Weight
- 18,140 lb
- 3-point lift
- 20,637 lb
- Hyd. flow
- 28.9 gpm
- Top speed
- 18.6–24.9 mph
Case-IH 7250 Magnum specs: key facts
The Case-IH 7250 Magnum was built from 1994 to 1997.
The Case-IH 7250 Magnum has a claimed engine power (gross or net not stated) of 183.1 kW (245.5 hp); it has no measured PTO figure.
The Case-IH 7250 Magnum is four-wheel drive (4WD).
The Case-IH 7250 Magnum has a CUMMINS 6 TA-830 engine, a 6-cylinder 8.27 L diesel unit.Source 1
The Case-IH 7250 Magnum weighs 8,228 kg (18,140 lb) unladen.
The Case-IH 7250 Magnum has a rear PTO running at 1000 rpm.
The three-point hitch of the Case-IH 7250 Magnum lifts 9,361 kg (20,637 lb) at the lower-link ends.
The hydraulic pump of the Case-IH 7250 Magnum delivers 109.4 L/min (28.9 gpm).
Source · Traktorenlexikon, “Case-IH 7250”
How much horsepower does a 7250 Magnum have?
The only figure for the 7250 Magnum is 245.5 hp (183.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case-IH 7250”
What engine is in a 7250 Magnum?
A 7250 Magnum has a CUMMINS 6 TA-830, a 6-cylinder 8.27 L diesel engine.
| Make & model | CUMMINS 6 TA-830Source 1 |
|---|---|
| Cylinders | 6, liquid-cooledSource 1 |
| Displacement | 504.5 ci · 8.27 LSource 1 |
| Max torque | 717 lb·ft · 972 N·m @ 1,400 rpm |
| Injection | direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case-IH 7250”
How much will a 7250 Magnum lift, and what is its hydraulic flow?
A 7250 Magnum lifts 20,637 lb (9,361 kg) at the lower-link ends of its Category 3 three-point hitch.
| Pump flow | 28.9 gpm · 109.4 L/min |
|---|---|
| Pressure | 2,451 psi · 169 bar |
| Hitch category | Category 3 |
| Lift at ends | 20,637 lb · 9,361 kg |
| Rear PTO | 1000 rpm |
| PTO shaft | 1 3/8"- 21 teilig |
Source · Traktorenlexikon, “Case-IH 7250”
What transmission does a 7250 Magnum have?
Transmission specifications for the 7250 Magnum are below.
| Clutch | Case-IH multi-plate clutch running in oil bath |
|---|---|
| Brakes | Pedal-operated hydraulic full-disc brake configured as individual wheel brake |
| Steering | Hydrostatic Eaton steering |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Case-IH 7250”
How much does a 7250 Magnum weigh?
A 7250 Magnum weighs 18,140 lb (8,228 kg) unladen.
| Unladen weight | 18,140 lb · 8,228 kg |
|---|---|
| Maximum permissible mass | 25,519 lb · 11,575 kg |
| Maximum front axle load | 9,877 lb · 4,480 kg |
| Maximum rear axle load | 18,651 lb · 8,460 kg |
| Wheelbase | 118.3 in · 3,006 mm |
| Length | 200.4 in · 5,090 mm |
| Width | 120.0 in · 3,048 mm |
| Height | 121.1 in · 3,077 mm |
| Ground clearance | 19.3 in · 489 mm |
| Front track | 60.1–94.8 in · 1,527–2,408 mm |
| Rear track | 64.0–155.6 in · 1,626–3,953 mm |
Source · Traktorenlexikon, “Case-IH 7250”
Which tractors compare with a 7250 Magnum?
Within 10% of its 216.8 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Case-IH 7150 Magnum216.83 hp PTO, claimed · 1990–1993Side by side with the 7250 Magnum →
- John Deere 8210 T216.3 hp PTO, claimed · 2000–2002Side by side with the 7250 Magnum →
- John Deere 8220 T216.3 hp PTO, claimed · 2002–2005Side by side with the 7250 Magnum →
- John Deere 8320218.52 hp PTO, claimed · 2002–2005Side by side with the 7250 Magnum →
- J.I. Case 4694219.0 hp PTO, claimed · 1984–1985Side by side with the 7250 Magnum →
- Massey Ferguson MF 8170 A214.6 hp PTO, claimed · 1998–1999Side by side with the 7250 Magnum →
Everything else people ask
Is a 7250 Magnum two-wheel drive or four-wheel drive?
The Case-IH 7250 Magnum is four-wheel drive (4WD).
What PTO does a 7250 Magnum have?
A 7250 Magnum has a 1000 rpm rear PTO on a 1 3/8"- 21 teilig shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Case-IH 7230 PRO/8930”; and Traktorenlexikon, “Case-IH 7250”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 7230 PRO/8930 — CC BY-SA 4.0, WIKIBOOKS-TL-90517 · revision 977810. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Case-IH 7250 — CC BY-SA 4.0, WIKIBOOKS-TL-90531 · revision 977745. Wikibooks contributors (Traktorenlexikon). Original document