• Rigid chassis
  • WhichTractor size: High-power
  • Not independently tested
  • 1994–1998

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

John Deere 8400 Full specifications

John Deere-PowerTech 6.081 HRW-01 six-cylinder diesel. The manufacturer claimed 256.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

256.7 hp

191.4 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “John Deere 8400”, claimed

Weight
19,191 lb
Top speed
23.6 mph

John Deere 8400 specs: key facts

  • The John Deere 8400 was built from 1994 to 1998.

  • The John Deere 8400 has a claimed engine power (gross or net not stated) of 191.4 kW (256.7 hp); it has no measured PTO figure.

  • The John Deere 8400 is four-wheel drive (4WD).

  • The John Deere 8400 has a John Deere-PowerTech 6.081 HRW-01 engine, a 6-cylinder 8.12 L diesel unit.

  • The John Deere 8400 weighs 8,705 kg (19,191 lb) unladen.

  • The John Deere 8400 has an independent rear PTO running at 1000 rpm.

Source · Traktorenlexikon, “John Deere 8400”

How much horsepower does an 8400 have?

The only figure for the 8400 is 256.7 hp (191.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
256.7 hp

Source · Traktorenlexikon, “John Deere 8400”

What engine is in an 8400?

An 8400 has a John Deere-PowerTech 6.081 HRW-01, a 6-cylinder 8.12 L diesel engine.

Engine — 8400 engine specifications
Make & modelJohn Deere-PowerTech 6.081 HRW-01
Cylinders6, liquid-cooled
Displacement495.5 ci · 8.12 L
Max torque777 lb·ft · 1,054 N·m @ 1,400 rpm
InjectionDirect injection method
Electrical system12 V

Source · Traktorenlexikon, “John Deere 8400”

How much will an 8400 lift?

Hydraulic and PTO specifications for the 8400 are below.

Hydraulics & PTO — 8400 hydraulics and PTO specifications
SystemLoad sensing
Rear PTOIndependent, engine-driven, 1000 rpm @ 1,978 engine rpmEngages under load

Source · Traktorenlexikon, “John Deere 8400”

What transmission does an 8400 have?

Transmission specifications for the 8400 are below.

Transmission — 8400 transmission specifications
ClutchPedal-operated hydraulic-wet John Deere multi-disc clutch
SteeringHydrostatic EATON steering, type 450
Top speed23.6 mph · 38 km/h

Source · Traktorenlexikon, “John Deere 8400”

How much does an 8400 weigh?

An 8400 weighs 19,191 lb (8,705 kg) unladen.

Weights & dimensions — 8400 weights and dimensions
Unladen weight19,191 lb · 8,705 kg
Maximum permissible mass30,865 lb · 14,000 kg
Maximum front axle load13,228 lb · 6,000 kg
Maximum rear axle load22,046 lb · 10,000 kg
Length214.4 in · 5,447 mm
Width118.6 in · 3,012 mm
Height121.7 in · 3,090 mm
Ground clearance15.9 in · 405 mm
Front track60.0–88.0 in · 1,524–2,235 mm
Rear track62.5–108.3 in · 1,588–2,752 mm

Source · Traktorenlexikon, “John Deere 8400”

Which tractors compare with an 8400?

Within 10% of its 256.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an 8400 two-wheel drive or four-wheel drive?

The John Deere 8400 is four-wheel drive (4WD).

What PTO does an 8400 have?

An 8400 has a independent 1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “John Deere 8400”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: John Deere 8400CC BY-SA 4.0, WIKIBOOKS-TL-48901 · revision 1023550. Wikibooks contributors (Traktorenlexikon). Original document