- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1984–1985
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
J.I. Case 2096 (DT) Full specifications
CUMMINS B6T-590 six-cylinder diesel. The manufacturer claimed 114.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
114.1 hp
85.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case 2096”, claimed
- Weight
- 11,874 lb
- 3-point lift
- 8,250 lb
- Hyd. flow
- 23.0 gpm
- Top speed
- 18.6 mph
J.I. Case 2096 (DT) specs: key facts
The J.I. Case 2096 (DT) was built from 1984 to 1985.
The J.I. Case 2096 (DT) has a claimed engine power (gross or net not stated) of 85.1 kW (114.1 hp); it has no measured PTO figure.
The J.I. Case 2096 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
The J.I. Case 2096 (DT) has a CUMMINS B6T-590 engine, a 6-cylinder 5.88 L diesel unit.Source 1
The J.I. Case 2096 (DT) weighs 5,386 kg (11,874 lb) unladen.
The J.I. Case 2096 (DT) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the J.I. Case 2096 (DT) lifts 3,742 kg (8,250 lb) at the lower-link ends.
The hydraulic pump of the J.I. Case 2096 (DT) delivers 87.1 L/min (23.0 gpm).
Source · Traktorenlexikon, “Case 2096”
How much horsepower does a 2096 (DT) have?
The only figure for the 2096 (DT) is 114.1 hp (85.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case 2096”
What engine is in a 2096 (DT)?
A 2096 (DT) has a CUMMINS B6T-590, a 6-cylinder 5.88 L diesel engine.
| Make & model | CUMMINS B6T-590 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 359.1 ci · 5.88 L |
| Max torque | 400 lb·ft · 542 N·m @ 1,700 rpmSource 2 |
| Injection | Direct injectionSource 2 |
Source · Traktorenlexikon, “Case 1896”
How much will a 2096 (DT) lift, and what is its hydraulic flow?
A 2096 (DT) lifts 8,250 lb (3,742 kg) at the lower-link ends.
| Pump flow | 23.0 gpm · 87.1 L/min |
|---|---|
| Lift at ends | 8,250 lb · 3,742 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,125 engine rpmEngages under load |
| PTO shaft | 1 3/8" splines Form-1 |
Source · Traktorenlexikon, “Case 2096”
What transmission does a 2096 (DT) have?
Transmission specifications for the 2096 (DT) are below.
| Clutch | Pedal-operated wet multi-disc driving clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering, type: Orbitrol |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Case 2096”
How much does a 2096 (DT) weigh?
A 2096 (DT) weighs 11,874 lb (5,386 kg) unladen.
| Unladen weight | 11,874 lb · 5,386 kgDT: 5,930 |
|---|---|
| Wheelbase | 108.0 in · 2,743 mm |
| Length | 171.0 in · 4,343 mm |
| Width | 101.1 in · 2,567 mm |
| Height | 118.0 in · 2,997 mm |
| Ground clearance | 16.0 in · 406 mm |
| Front track | 60.0–88.0 in · 1,524–2,235 mmDT: 1,524-2,261 |
| Rear track | 60.0–110.0 in · 1,524–2,794 mm |
| Turning radius, braked | 13.1 ft · 3.99 m |
Source · Traktorenlexikon, “Case 2096”
Which tractors compare with a 2096 (DT)?
Within 10% of its 115.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- J.I. Case 2294 (DT)115.5 hp PTO, claimed · 1984–1985Side by side with the 2096 (DT) →
- Fiat 1300 (DT)115.4 hp PTO, claimed · 1974–1977Side by side with the 2096 (DT) →
- SOMECA 1300 (TD)115.4 hp PTO, claimed · 1974–1977Side by side with the 2096 (DT) →
- Fiat 1300 DT115 hp PTO, claimed · 1973–1976Side by side with the 2096 (DT) →
- John Deere 7510115.1 hp PTO, measured · 1999–2002Side by side with the 2096 (DT) →
- Massey Ferguson MF 3630114.7 hp PTO, claimed · 1987–1990Side by side with the 2096 (DT) →
Everything else people ask
Is a 2096 (DT) two-wheel drive or four-wheel drive?
The J.I. Case 2096 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 2096 (DT) have?
A 2096 (DT) has a independent 540/1000 rpm rear PTO on a 1 3/8" splines Form-1 shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Case 1896”; and Traktorenlexikon, “Case 2096”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case 1896 — CC BY-SA 4.0, WIKIBOOKS-TL-115453 · revision 989896. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Case 2096 — CC BY-SA 4.0, WIKIBOOKS-TL-115454 · revision 989897. Wikibooks contributors (Traktorenlexikon). Original document