9 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 6.301983–1990No measured PTO figureTractor twoJ.I. Case 2096 (DT)1984–1985No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.30 and the 2096 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.30 and J.I. Case 2096 (DT), field by field
Field	DX 6.30	2096 (DT)	Gap
Engine
Engine power, claimed claimed	113.7 hp	114.1 hp	—
Engine declared	—	CUMMINS B6T-590	—
Displacement declared	—	5.88 L	—
Maximum torque declared	281 lb·ft · 381 N·m	400 lb·ft · 542 N·m	+42% 2096 (DT)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Pedal-operated wet multi-disc driving clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	16.0 gpm · 60.4 L/min	23.0 gpm · 87.1 L/min	+44% 2096 (DT)
Pressure declared	3,481 psi · 240 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	10,670 lb · 4,840 kg	11,874 lb · 5,386 kg	+11% 2096 (DT)
Maximum permissible mass declared	14,991 lb · 6,800 kg	—	—
Wheelbase declared	106.4 in · 2,703 mm	108.0 in · 2,743 mm	—
Length declared	179.1 in · 4,550 mm	171.0 in · 4,343 mm	—
Width declared	90.7 in · 2,304 mm	101.1 in · 2,567 mm	+11% 2096 (DT)
Height, over the cab declared	104.3 in · 2,650 mm	118.0 in · 2,997 mm	+13% 2096 (DT)
Ground clearance declared	21.3 in · 540 mm	16.0 in · 406 mm	+33% DX 6.30
Turning radius, braked declared	16.2 ft · 4.94 m	13.1 ft · 3.99 m	+24% DX 6.30
Fuel tank declared	126.8 qt · 120 L	259.9 qt · 246.0 L	+105% 2096 (DT)

Source

Source