10 material differences · fewer than 12
Tractor oneFendt Favorit 711 Variofrom 1999No measured PTO figureTractor twoJ.I. Case 2096 (DT)1984–1985No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 711 Vario and the 2096 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Favorit 711 Vario | 2096 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.7 hp | 114.1 hp | — |
| Engine declared | Deutz BF6M 2013 C | CUMMINS B6T-590 | differs |
| Displacement declared | 5.70 L | 5.88 L | — |
| Maximum torque declared | — | 400 lb·ft · 542 N·m | — |
| Transmission | |||
| Top speed declared | 31.1 mph · 50 km/h | 18.6 mph · 30 km/h | +67% Favorit 711 Vario |
| Clutch declared | — | Pedal-operated wet multi-disc driving clutch | — |
| Hydraulics & hitch | |||
| Hydraulic control declared | Load sensing | — | — |
| Pump flow declared | 29.1 gpm · 110.0 L/min | 23.0 gpm · 87.1 L/min | +26% Favorit 711 Vario |
| Pressure declared | 2,901 psi · 200 bar | — | — |
| Rear PTO speeds declared | 540 rpm / 750 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 12,456–13,603 lb · 5,650–6,170 kg | 11,874 lb · 5,386 kg | differs |
| Maximum permissible mass declared | 20,944 lb · 9,500 kg | — | — |
| Wheelbase declared | 106.3 in · 2,700 mm | 108.0 in · 2,743 mm | — |
| Length declared | 181.7–182.7 in · 4,615–4,640 mm | 171.0 in · 4,343 mm | differs |
| Width declared | 94.1–95.6 in · 2,390–2,429 mm | 101.1 in · 2,567 mm | differs |
| Ground clearance declared | 20.8 in · 528 mm | 16.0 in · 406 mm | +30% Favorit 711 Vario |
| Turning radius, braked declared | 16.1 ft · 4.90 m | 13.1 ft · 3.99 m | +23% Favorit 711 Vario |
| Fuel tank declared | 317.0 qt · 300 L | 259.9 qt · 246.0 L | +22% Favorit 711 Vario |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 711 Vario sources
- Source: Traktorenlexikon, “Fendt Favorit 711 Vario”
- Source: Traktorenlexikon, “Fendt Favorit 714 Vario”
J.I. Case 2096 (DT) sources
- Source: Traktorenlexikon, “Case 2096”
- Source: Traktorenlexikon, “Case 1896”