• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1984–1985

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

J.I. Case 2094 Full specifications

CASE 504 BD six-cylinder diesel. The manufacturer claimed 119 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

119 hp

89 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case 2094”, claimed

Weight
14,189 lb
3-point lift
9,998 lb
Top speed
18.6 mph

J.I. Case 2094 specs: key facts

  • The J.I. Case 2094 was built from 1984 to 1985.

  • The J.I. Case 2094 has a claimed engine power (gross or net not stated) of 89 kW (119 hp); it has no measured PTO figure.

  • The J.I. Case 2094 was offered in two-wheel-drive and four-wheel-drive versions.

  • The J.I. Case 2094 has a CASE 504 BD engine, a 6-cylinder 8.26 L diesel unit.Source 1

  • The J.I. Case 2094 weighs 6,436 kg (14,189 lb) unladen.

  • The J.I. Case 2094 has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the J.I. Case 2094 lifts 4,535 kg (9,998 lb) at the lower-link ends.

Source · Traktorenlexikon, “Case 2094”

How much horsepower does a 2094 have?

The only figure for the 2094 is 119 hp (89 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
119 hp

Source · Traktorenlexikon, “Case 2094”

What engine is in a 2094?

A 2094 has a CASE 504 BD, a 6-cylinder 8.26 L diesel engine.

Engine — 2094 engine specifications
Make & modelCASE 504 BDSource 1
Cylinders6, liquid-cooledSource 1
Displacement504.0 ci · 8.26 LSource 1
Max torque367 lb·ft · 497 N·m @ 1,575 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Case 2094”

How much will a 2094 lift?

A 2094 lifts 9,998 lb (4,535 kg) at the lower-link ends.

Hydraulics & PTO — 2094 hydraulics and PTO specifications
Lift at ends9,998 lb · 4,535 kg
Rear PTO540/1000 rpm
PTO shaft1 3/8" - splines (Form-1)

Source · Traktorenlexikon, “Case 2094”

What transmission does a 2094 have?

Transmission specifications for the 2094 are below.

Transmission — 2094 transmission specifications
Clutchpedal operated wet disc clutch
Steeringhydrostatic steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case 2094”

How much does a 2094 weigh?

A 2094 weighs 14,189 lb (6,436 kg) unladen.

Weights & dimensions — 2094 weights and dimensions
Unladen weight14,189 lb · 6,436 kgDT: 6,889
Wheelbase110.0 in · 2,794 mm
Length175.5 in · 4,458 mm
Width96.0 in · 2,438 mm
Height116.5 in · 2,960 mm
Ground clearance19.5 in · 495 mm
Front track60.0–88.0 in · 1,524–2,235 mm
Rear track60.0–124.0 in · 1,524–3,150 mm
Turning radius, braked13.5 ft · 4.11 m

Source · Traktorenlexikon, “Case 2094”

Which tractors compare with a 2094?

Within 10% of its 110.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 2094 two-wheel drive or four-wheel drive?

The J.I. Case 2094 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 2094 have?

A 2094 has a 540/1000 rpm rear PTO on a 1 3/8" - splines (Form-1) shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Case 2090”; and Traktorenlexikon, “Case 2094”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case 2090CC BY-SA 4.0, WIKIBOOKS-TL-115391 · revision 986978. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Case 2094CC BY-SA 4.0, WIKIBOOKS-TL-115420 · revision 989885. Wikibooks contributors (Traktorenlexikon). Original document