- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1974–1975
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester 475 specs: hp, weight, years
Perkins A 4.212 four-cylinder diesel. The manufacturer claimed 58.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
58.2 hp
43.4 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “IHC 475”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 5,655 lb
- 3-point lift
- 3,911 lb
- Hyd. flow
- 10.1 gpm
- Top speed
- 12.4–18.6 mph
International Harvester 475 specs: key facts
The International Harvester 475 was built from 1974 to 1975.
The International Harvester 475 has a claimed engine power (gross or net not stated) of 43.4 kW (58.2 hp); it has no measured PTO figure.
The International Harvester 475 is two-wheel drive (2WD).
The International Harvester 475 has a Perkins A 4.212 engine, a 4-cylinder 3.47 L diesel unit.Source 2
The International Harvester 475 weighs 2,565 kg (5,655 lb) unladen.
The International Harvester 475 has a rear PTO running at 540/1000 rpm.
The three-point hitch of the International Harvester 475 lifts 1,774 kg (3,911 lb) at the lower-link ends.
The hydraulic pump of the International Harvester 475 delivers 38.2 L/min (10.1 gpm).
Source · Traktorenlexikon, “IHC 475”
How much horsepower does a 475 have?
The only figure for the 475 is 58.2 hp (43.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “IHC 475”
What engine is in a 475?
A 475 has a Perkins A 4.212, a 4-cylinder 3.47 L diesel engine.
| Make & model | Perkins A 4.212Source 2 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 212.0 ci · 3.47 LSource 2 |
| Max torque | 131 lb·ft · 178 N·m @ 1,480 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “IHC 475”
How much will a 475 lift, and what is its hydraulic flow?
A 475 lifts 3,911 lb (1,774 kg) at the lower-link ends.
| Pump flow | 10.1 gpm · 38.2 L/min |
|---|---|
| Lift at ends | 3,911 lb · 1,774 kg |
| Rear PTO | 540/1000 rpm |
| PTO shaft | 1 3/8"- 6 splines and 21 spline |
Source · Traktorenlexikon, “IHC 475”
What transmission does a 475 have?
Transmission specifications for the 475 are below.
| Clutch | Pedal-operated dry Laycock single-plate clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering with double-acting cylinders |
| Top speed | 12.4–18.6 mph · 20–30 km/hthe article lists alternatives |
Source · Traktorenlexikon, “IHC 475”
How much does a 475 weigh?
A 475 weighs 5,655 lb (2,565 kg) unladen.
| Unladen weight | 5,655 lb · 2,565 kg |
|---|---|
| Wheelbase | 84.5 in · 2,146 mm |
| Length | 135.0 in · 3,430 mm |
| Width | 64.2 in · 1,630 mm |
| Height | 59.4 in · 1,510 mm |
| Ground clearance | 16.0 in · 406 mm |
| Front track | 52.0–80.0 in · 1,321–2,032 mm |
| Rear track | 52.0–76.0 in · 1,321–1,930 mm |
| Turning radius, braked | 11.1 ft · 3.37 m |
Source · Traktorenlexikon, “IHC 475”
What oil does a 475 take, and how much?
A 475 engine takes 8.5 qt (8.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 8.5 qt · 8.0 LSource: Traktorenlexikon, “IHC 475” · single source, not independently verified |
| Transmission | 36.0 qt · 34.1 LSource: Traktorenlexikon, “IHC 475” · single source, not independently verified |
| Cooling system | 12.0 qt · 11.4 LSource: Traktorenlexikon, “IHC 475” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 475?
Within 10% of its 46.1 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- International Harvester 55346.1 hp PTO, claimed · 1972–1974Side by side with the 475 →
- Porsche-Diesel Master 41846.2 hp PTO, claimed · 1960Side by side with the 475 →
- David Brown 990 Selectmatic46.0 hp PTO, claimed · 1965–1979Side by side with the 475 →
- Massey Ferguson 15846.3 hp PTO, claimed · 1972–1976Side by side with the 475 →
- IMR-RAKOVICA R-6045.9 hp PTO, claimed · from 1967Side by side with the 475 →
- Deutz D 500645.8 hp PTO, claimed · 1968–1974Side by side with the 475 →
Common questions about the International Harvester 475
Is a 475 two-wheel drive or four-wheel drive?
The International Harvester 475 is two-wheel drive (2WD).
What PTO does a 475 have?
A 475 has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 21 spline shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Massey Ferguson MF 165 S”; and Traktorenlexikon, “IHC 475”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 475 — CC BY-SA 4.0, WIKIBOOKS-TL-118487 · revision 1028179. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Massey Ferguson MF 165 S — CC BY-SA 4.0, WIKIBOOKS-TL-104176 · revision 992089. Wikibooks contributors (Traktorenlexikon). Original document