12 material differences
Tractor oneInternational Harvester 4751974–1975No measured PTO figureTractor twoInternational Harvester 5531972–1974No measured PTO figure
Which should you choose?
We will not advise between these two machines, because the drive differs (2WD; Two-wheel or four-wheel drive). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
12 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 475 | 553 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 58.2 hp | 51.1 hp | +14% 475 |
| Engine declared | Perkins A 4.212 | IHC D-179 | differs |
| Displacement declared | 3.47 L | 2.93 L | +18% 475 |
| Maximum torque declared | 131 lb·ft · 178 N·m | 142 lb·ft · 192 N·m | +8% 553 |
| Transmission | |||
| Top speed declared | 12.4–18.6 mph · 20–30 km/h | 17.4 mph · 28 km/h | differs |
| Clutch declared | Pedal-operated dry Laycock single-plate clutch | Single-plate dry clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 10.1 gpm · 38.2 L/min | 6.8 gpm · 25.6 L/min | +49% 475 |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,655 lb · 2,565 kg | 5,765 lb · 2,615 kg | — |
| Wheelbase declared | 84.5 in · 2,146 mm | 78.7 in · 2,000 mm | +7% 475 |
| Length declared | 135.0 in · 3,430 mm | 135.0 in · 3,430 mm | — |
| Width declared | 64.2 in · 1,630 mm | 70.4 in · 1,788 mm | +10% 553 |
| Ground clearance declared | 16.0 in · 406 mm | 17.5 in · 445 mm | +10% 553 |
| Turning radius, braked declared | 11.1 ft · 3.37 m | 12.0 ft · 3.65 m | +8% 553 |
| Fuel tank declared | 81.7 qt · 77.3 L | 74.0 qt · 70 L | +10% 475 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 475 sources
- Source: Traktorenlexikon, “IHC 475”
- Source: Traktorenlexikon, “Massey Ferguson MF 165 S”
International Harvester 553 sources
- Source: Traktorenlexikon, “IHC 553”