- Vehicle type: unspecified
- WhichTractor size: Standard-size
- Not independently tested
- 1923–1940
- 17,918 built
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
International Harvester 10-20 Industrial Full specifications
INTERNATIONAL HARVESTER 284 four-cylinder petrol. The manufacturer claimed 27.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
27.5 hp
20.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “McCormick 10-20 Industrial”, claimed
- Weight
- 5,481 lb
- Top speed
- 5.0 mph
International Harvester 10-20 Industrial specs: key facts
The International Harvester 10-20 Industrial was built from 1923 to 1940.
The International Harvester 10-20 Industrial has a claimed engine power (gross or net not stated) of 20.5 kW (27.5 hp); it has no measured PTO figure.
The International Harvester 10-20 Industrial is two-wheel drive (2WD).Source 1
The International Harvester 10-20 Industrial has a INTERNATIONAL HARVESTER 284 engine, a 4-cylinder 4.65 L petrol unit.Source 2
The International Harvester 10-20 Industrial weighs 2,486 kg (5,481 lb) unladen.Source 1
The International Harvester 10-20 Industrial has a rear PTO running at 742 rpm.
Source · Traktorenlexikon, “McCormick 10-20 Industrial”
How much horsepower does a 10-20 Industrial have?
The only figure for the 10-20 Industrial is 27.5 hp (20.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “McCormick 10-20 Industrial”
What engine is in a 10-20 Industrial?
A 10-20 Industrial has an INTERNATIONAL HARVESTER 284, a 4-cylinder 4.65 L petrol engine.
| Make & model | INTERNATIONAL HARVESTER 284 |
|---|---|
| Cylinders | 4, liquid-cooledSource 3 |
| Displacement | 283.7 ci · 4.65 L |
Source · Traktorenlexikon, “McCormick 10-20”
How much will a 10-20 Industrial lift?
Hydraulic and PTO specifications for the 10-20 Industrial are below.
| Rear PTO | 742 rpm |
|---|
Source · Traktorenlexikon, “McCormick 10-20 Industrial”
What transmission does a 10-20 Industrial have?
Transmission specifications for the 10-20 Industrial are below.
| Clutch | Pedal-operated dry single-disc clutchSource 3Sources disagreePedal-operated dry single-plate clutch (Traktorenlexikon, “IHC 10-20 Industrial”) |
|---|---|
| Brakes | Hand lever operated transmission brakeSource 3 |
| Steering | Mechanically operated worm gear |
| Top speed | 5.0 mph · 8.0 km/h |
Source · Traktorenlexikon, “IHC 10-20 Industrial”
How much does a 10-20 Industrial weigh?
A 10-20 Industrial weighs 5,481 lb (2,486 kg) unladen.
| Unladen weight | 5,481 lb · 2,486 kg |
|---|---|
| Wheelbase | 78.0 in · 1,981 mm |
| Length | 118.0 in · 2,997 mm |
| Width | 59.0 in · 1,499 mm |
| Height | 62.0 in · 1,575 mm |
| Front track | 52.0 in · 1,321 mm |
| Rear track | 62.0 in · 1,575 mmSource 3 |
Source · Traktorenlexikon, “IHC 10-20 Industrial”
Everything else people ask
Is a 10-20 Industrial two-wheel drive or four-wheel drive?
The International Harvester 10-20 Industrial is two-wheel drive (2WD).
What PTO does a 10-20 Industrial have?
A 10-20 Industrial has a 742 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “McCormick 10-20 Industrial”; Traktorenlexikon, “IHC 10-20 Industrial”; and Traktorenlexikon, “McCormick 10-20”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: IHC 10-20 Industrial — CC BY-SA 4.0, WIKIBOOKS-TL-118688 · revision 1031886. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick 10-20 — CC BY-SA 4.0, WIKIBOOKS-TL-88875 · revision 1018114. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick 10-20 Industrial — CC BY-SA 4.0, WIKIBOOKS-TL-117708 · revision 1018115. Wikibooks contributors (Traktorenlexikon). Original document