5 material differences · fewer than 12
Tractor oneDeutz (KHD) MTZ 1201926–1929No measured PTO figureTractor twoInternational Harvester 10-20 Industrial1923–1940No measured PTO figure
Which should you choose?
Read our verdict on the MTZ 120 and the 10-20 Industrial → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | MTZ 120 | 10-20 Industrial | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 26.7 hp | 27.5 hp | — |
| Engine declared | — | INTERNATIONAL HARVESTER 284 | — |
| Displacement declared | — | 4.65 L | — |
| Transmission | |||
| Top speed declared | 3.9 mph · 6.3 km/h | 5.0 mph · 8.0 km/h | +27% 10-20 Industrial |
| Clutch declared | — | Pedal-operated dry single-disc clutch | — |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 600 | 742 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,842 lb · 2,650 kg | 5,481 lb · 2,486 kg | +7% MTZ 120 |
| Wheelbase declared | 70.1 in · 1,780 mm | 78.0 in · 1,981 mm | +11% 10-20 Industrial |
| Length declared | 121.1 in · 3,075 mm | 118.0 in · 2,997 mm | — |
| Width declared | 70.9 in · 1,800 mm | 59.0 in · 1,499 mm | +20% MTZ 120 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) MTZ 120 sources
- Source: Traktorenlexikon, “Deutz MTZ 120”
International Harvester 10-20 Industrial sources
- Source: Traktorenlexikon, “McCormick 10-20 Industrial”
- Source: Traktorenlexikon, “McCormick 10-20”
- Source: Traktorenlexikon, “IHC 10-20 Industrial”