• Vehicle type: unspecified
  • WhichTractor size: Utility
  • Not independently tested
  • 1923–1939
  • 215,472 built

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

International Harvester 10-20 Full specifications

INTERNATIONAL HARVESTER 284 four-cylinder petrol. The manufacturer claimed 20.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

20.0 hp

14.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IHC 10-20”, claimed

Weight
4,010 lb
Top speed
4.3 mph

International Harvester 10-20 specs: key facts

  • The International Harvester 10-20 was built from 1923 to 1939.

  • The International Harvester 10-20 has a claimed engine power (gross or net not stated) of 14.9 kW (20.0 hp); it has no measured PTO figure.

  • The International Harvester 10-20 is two-wheel drive (2WD).Source 2

  • The International Harvester 10-20 has a INTERNATIONAL HARVESTER 284 engine, a 4-cylinder 4.65 L petrol unit.Source 2

  • The International Harvester 10-20 weighs 1,819 kg (4,010 lb) unladen.

  • The International Harvester 10-20 has a rear PTO running at 661 rpm.

Source · Traktorenlexikon, “IHC 10-20”

How much horsepower does a 10-20 have?

The only figure for the 10-20 is 20.0 hp (14.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
20.0 hp

Source · Traktorenlexikon, “IHC 10-20”

What engine is in a 10-20?

A 10-20 has an INTERNATIONAL HARVESTER 284, a 4-cylinder 4.65 L petrol engine.

Engine — 10-20 engine specifications
Make & modelINTERNATIONAL HARVESTER 284
Cylinders4, liquid-cooledSource 1
Displacement283.7 ci · 4.65 L

Source · Traktorenlexikon, “McCormick 10-20”

How much will a 10-20 lift?

Hydraulic and PTO specifications for the 10-20 are below.

Hydraulics & PTO — 10-20 hydraulics and PTO specifications
Rear PTO661 rpm

Source · Traktorenlexikon, “IHC 10-20”

What transmission does a 10-20 have?

Transmission specifications for the 10-20 are below.

Transmission — 10-20 transmission specifications
Clutchpedal operated dry single plate clutchSource 2Sources disagreePedal-operated dry single-plate clutch (Traktorenlexikon, “IHC 10-20”)
Brakeshand lever operated transmission brakeSource 2Sources disagreeHand lever operated transmission brake (Traktorenlexikon, “IHC 10-20”)
SteeringMechanically operated worm gear
Top speed4.3 mph · 7.0 km/h

Source · Traktorenlexikon, “IHC 10-20”

How much does a 10-20 weigh?

A 10-20 weighs 4,010 lb (1,819 kg) unladen.

Weights & dimensions — 10-20 weights and dimensions
Unladen weight4,010 lb · 1,819 kg
Wheelbase78.0 in · 1,981 mm
Length123.0 in · 3,124 mm
Width60.0 in · 1,524 mm
Height62.0 in · 1,575 mm
Front track45.5 in · 1,155 mm
Rear track48.0 in · 1,219 mmSource 2

Source · Traktorenlexikon, “IHC 10-20”

Everything else people ask

Is a 10-20 two-wheel drive or four-wheel drive?

The International Harvester 10-20 is two-wheel drive (2WD).

What PTO does a 10-20 have?

A 10-20 has a 661 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “IHC 10-20”; and Traktorenlexikon, “McCormick 10-20”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IHC 10-20CC BY-SA 4.0, WIKIBOOKS-TL-118687 · revision 1031885. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: McCormick 10-20CC BY-SA 4.0, WIKIBOOKS-TL-88875 · revision 1018114. Wikibooks contributors (Traktorenlexikon). Original document