- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1972–1976
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 9600 (A) Full specifications
Ford 401 DFT six-cylinder diesel. The manufacturer claimed 136.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
136.1 hp
101.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 9600”, claimed
- Weight
- 13,823 lb
- 3-point lift
- 7,055 lb
- Hyd. flow
- 16.0 gpm
- Top speed
- 15.5–18.6 mph
Ford 9600 (A) specs: key facts
The Ford 9600 (A) was built from 1972 to 1976.
The Ford 9600 (A) has a claimed engine power (gross or net not stated) of 101.5 kW (136.1 hp); it has no measured PTO figure.
The Ford 9600 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Ford 9600 (A) has a Ford 401 DFT engine, a 6-cylinder 6.58 L diesel unit.
The Ford 9600 (A) weighs 6,270 kg (13,823 lb) unladen.
The Ford 9600 (A) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Ford 9600 (A) lifts 3,200 kg (7,055 lb) at the lower-link ends.
The hydraulic pump of the Ford 9600 (A) delivers 60.6 L/min (16.0 gpm).
Source · Traktorenlexikon, “Ford 9600”
How much horsepower does a 9600 (A) have?
The only figure for the 9600 (A) is 136.1 hp (101.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 9600”
What engine is in a 9600 (A)?
A 9600 (A) has a Ford 401 DFT, a 6-cylinder 6.58 L diesel engine.
| Make & model | Ford 401 DFT |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 401.4 ci · 6.58 L |
| Max torque | 358 lb·ft · 485 N·m @ 1,600 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Ford 9600”
How much will a 9600 (A) lift, and what is its hydraulic flow?
A 9600 (A) lifts 7,055 lb (3,200 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 16.0 gpm · 60.6 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 7,055 lb · 3,200 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 1,900 engine rpmEngages under load |
Source · Traktorenlexikon, “Ford 9600”
What transmission does a 9600 (A) have?
Transmission specifications for the 9600 (A) are below.
| Clutch | Pedal-operated dry single-disc clutch |
|---|---|
| Steering | Hydrostatic steering with adjustable steering column and separate hydraulic pump |
| Top speed | 15.5–18.6 mph · 25–30 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Ford 9600”
How much does a 9600 (A) weigh?
A 9600 (A) weighs 13,823 lb (6,270 kg) unladen.
| Unladen weight | 13,823 lb · 6,270 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 91.5 in · 2,324 mmRC: 2,743 |
| Length | 151.0 in · 3,835 mmRC: 4,013 |
| Width | 91.1 in · 2,314 mmRC: 2,093 |
| Height | 117.0 in · 2,972 mmRC: 2,913 |
| Ground clearance | 27.0 in · 685 mmRC: 640 |
| Front track | 56.0–84.0 in · 1,422–2,134 mm |
| Rear track | 68.0–90.0 in · 1,727–2,286 mm |
| Turning radius, braked | 11.0 ft · 3.35 m |
Source · Traktorenlexikon, “Ford 9600”
Which tractors compare with a 9600 (A)?
Within 10% of its 128.4 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- VOLVO-BM-VALMET Volvo 2005128.5 hp PTO, claimed · 1985–1987Side by side with the 9600 (A) →
- VALMET 2005-4128.5 hp PTO, claimed · 1986–1987Side by side with the 9600 (A) →
- VOLVO-BM 2650128 hp PTO, claimed · 1978–1984Side by side with the 9600 (A) →
- VOLVO-BM 2654128 hp PTO, claimed · 1978–1984Side by side with the 9600 (A) →
- VOLVO-BM T 2650128 hp PTO, claimed · 1978–1984Side by side with the 9600 (A) →
- VOLVO-BM T 2654128 hp PTO, claimed · 1978–1984Side by side with the 9600 (A) →
Everything else people ask
Is a 9600 (A) two-wheel drive or four-wheel drive?
The Ford 9600 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 9600 (A) have?
A 9600 (A) has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Ford 9600”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 9600 — CC BY-SA 4.0, WIKIBOOKS-TL-90190 · revision 1055065. Wikibooks contributors (Traktorenlexikon). Original document