WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1970–1975

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Ford 7400 Full specifications

Ford 2714 E six-cylinder diesel. The manufacturer claimed 98.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

98.6 hp

73.5 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ford 7400”, claimed

Weight
8,267 lb
Hyd. flow
6.0 gpm
Top speed
15.5 mph

Ford 7400 specs: key facts

  • The Ford 7400 was built from 1970 to 1975.

  • The Ford 7400 was sold under the Ford badge and built by EVA.

  • The Ford 7400 has a claimed engine power (gross or net not stated) of 73.5 kW (98.6 hp); it has no measured PTO figure.

  • The Ford 7400 is two-wheel drive (2WD).

  • The Ford 7400 has a Ford 2714 E engine, a 6-cylinder 6.22 L diesel unit.Source 2

  • The Ford 7400 weighs 3,750 kg (8,267 lb) unladen.

  • The Ford 7400 has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Ford 7400 delivers 22.7 L/min (6.0 gpm).

Source · Traktorenlexikon, “Ford 7400”

How much horsepower does a 7400 have?

The only figure for the 7400 is 98.6 hp (73.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
98.6 hp

Source · Traktorenlexikon, “Ford 7400”

What engine is in a 7400?

A 7400 has a Ford 2714 E, a 6-cylinder 6.22 L diesel engine.

Engine — 7400 engine specifications
Make & modelFord 2714 ESource 2
Cylinders6, liquid-cooledSource 2
Displacement379.8 ci · 6.22 LSource 2
Max torque273 lb·ft · 370 N·m @ 1,600 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Ford 7400”

How much will a 7400 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 7400 are below.

Hydraulics & PTO — 7400 hydraulics and PTO specifications
Pump flow6.0 gpm · 22.7 L/min
Hitch categoryCategory 2
Rear PTOIndependent, engine-driven, 540/1000 rpmEngages under load

Source · Traktorenlexikon, “Ford 7400”

What transmission does a 7400 have?

Transmission specifications for the 7400 are below.

Transmission — 7400 transmission specifications
ClutchPedal operated dry single plate clutch
SteeringRecirculating ball steering with hydraulic power assist
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Ford 7400”

How much does a 7400 weigh?

A 7400 weighs 8,267 lb (3,750 kg) unladen.

Weights & dimensions — 7400 weights and dimensions
Unladen weight8,267 lb · 3,750 kg
Wheelbase99.6 in · 2,530 mm
Length153.5 in · 3,900 mm
Width76.8 in · 1,950 mm
Height94.5 in · 2,400 mm
Front track56.0–80.0 in · 1,422–2,032 mm
Rear track63.9–80.0 in · 1,624–2,032 mm
Turning radius, braked14.6 ft · 4.45 m

Source · Traktorenlexikon, “Ford 7400”

Which tractors compare with a 7400?

Within 10% of its 98.6 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 7400 two-wheel drive or four-wheel drive?

The Ford 7400 is two-wheel drive (2WD).

What PTO does a 7400 have?

A 7400 has a independent 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Ford 7400”; and Traktorenlexikon, “Ford 8100”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ford 7400 — CC BY-SA 4.0, WIKIBOOKS-TL-110091 · revision 914764. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Ford 8100 — CC BY-SA 4.0, WIKIBOOKS-TL-88640 · revision 683113. Wikibooks contributors (Traktorenlexikon). Original document