10 material differences · fewer than 12
Tractor oneFord 74001970–1975No measured PTO figureTractor twoLandini 10.000 (DT)1978–1993No measured PTO figure
Which should you choose?
Read our verdict on the 7400 and the 10.000 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 7400 | 10.000 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.6 hp | — |
| Engine declared | Ford 2714 E | Perkins TW 31087 U (A. 6.354.4/A. 6.354.4 HTR) | differs |
| Displacement declared | 6.22 L | 5.79 L | +7% 7400 |
| Maximum torque declared | 273 lb·ft · 370 N·m | 289 lb·ft · 392 N·m | +6% 10.000 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 10.000 (DT) |
| Clutch declared | Pedal operated dry single plate clutch | Pedal-operated, dry and air-cooled double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.0 gpm · 22.7 L/min | 12.3 gpm · 46.5 L/min | +105% 10.000 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,267 lb · 3,750 kg | 9,976 lb · 4,525 kg | +21% 10.000 (DT) |
| Wheelbase declared | 99.6 in · 2,530 mm | 104.7 in · 2,660 mm | — |
| Length declared | 153.5 in · 3,900 mm | 171.3 in · 4,350 mm | +12% 10.000 (DT) |
| Width declared | 76.8 in · 1,950 mm | 83.9 in · 2,130 mm | +9% 10.000 (DT) |
| Height, over the safety frame declared | 94.5 in · 2,400 mm | 113.2 in · 2,875 mm | +20% 10.000 (DT) |
| Ground clearance declared | — | 16.9 in · 430 mm | — |
| Turning radius, braked declared | 14.6 ft · 4.45 m | — | — |
| Fuel tank declared | — | 179.6 qt · 170.0 L | — |
Ford 7400 sources
Source
- Source: Traktorenlexikon, “Ford 7400”
- Source: Traktorenlexikon, “Ford 8100”
Landini 10.000 (DT) sources
Source
- Source: Traktorenlexikon, “Landini 10000”