11 material differences · fewer than 12
Tractor oneFord 74001970–1975No measured PTO figureTractor twoZETOR 10111/101451984–1990No measured PTO figure
Which should you choose?
Read our verdict on the 7400 and the 10111/10145 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 7400 | 10111/10145 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.6 hp | — |
| Engine declared | Ford 2714 E | ZETOR Z-8002.1 | differs |
| Displacement declared | 6.22 L | 4.56 L | +36% 7400 |
| Maximum torque declared | 273 lb·ft · 370 N·m | 227 lb·ft · 308 N·m | +20% 7400 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Pedal operated dry single plate clutch | Pedal-operated dry ZTS single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 6.0 gpm · 22.7 L/min | 12.2 gpm · 46.2 L/min | +104% 10111/10145 |
| Pressure declared | — | 2,828 psi · 195 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,267 lb · 3,750 kg | 9,414 lb · 4,270 kg | +14% 10111/10145 |
| Wheelbase declared | 99.6 in · 2,530 mm | 93.9 in · 2,385 mm | +6% 7400 |
| Length declared | 153.5 in · 3,900 mm | 163.0 in · 4,140 mm | +6% 10111/10145 |
| Width declared | 76.8 in · 1,950 mm | 76.4–89.8 in · 1,940–2,280 mm | differs |
| Ground clearance declared | — | 11.8 in · 300 mm | — |
| Turning radius, braked declared | 14.6 ft · 4.45 m | 11.9 ft · 3.63 m | +23% 7400 |
| Fuel tank declared | — | 132.1 qt · 125.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 7400 sources
- Source: Traktorenlexikon, “Ford 7400”
- Source: Traktorenlexikon, “Ford 8100”
ZETOR 10111/10145 sources
- Source: Traktorenlexikon, “Zetor 10111/10145”