10 material differences · fewer than 12
Tractor oneFord 7095 (A)1976–1981No measured PTO figureTractor twoLandini R-9500 (DT) "TL 19 N/B"1973–1983No measured PTO figure
Which should you choose?
Read our verdict on the 7095 (A) and the R-9500 (DT) "TL 19 N/B" → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 7095 (A) | R-9500 (DT) "TL 19 N/B" | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 103 hp | 103.5 hp | — |
| Engine declared | Ford 2714 E | Perkins A 6.354 | differs |
| Displacement declared | 6.22 L | 5.80 L | +7% 7095 (A) |
| Maximum torque declared | 274 lb·ft · 372 N·m | 182 lb·ft · 247 N·m | +51% 7095 (A) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% R-9500 (DT) "TL 19 N/B" |
| Clutch declared | — | Dry VALEO double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.2 gpm · 35.0 L/min | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,378 lb · 3,800 kg | 7,738 lb · 3,510 kg | +8% 7095 (A) |
| Wheelbase declared | 100.4 in · 2,550 mm | 95.3 in · 2,420 mm | +5% 7095 (A) |
| Length declared | 177.2 in · 4,500 mm | 160.6 in · 4,080 mm | +10% 7095 (A) |
| Width declared | 78.7 in · 2,000 mm | 81.5–93.3 in · 2,070–2,370 mm | differs |
| Ground clearance declared | 21.3 in · 540 mm | 19.3 in · 490 mm | +10% 7095 (A) |
| Turning radius, braked declared | — | 13.3 ft · 4.06 m | — |
| Fuel tank declared | — | 97.2 qt · 92.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 7095 (A) sources
- Source: Traktorenlexikon, “Ford 7095”
- Source: Traktorenlexikon, “Ford 8100”
Landini R-9500 (DT) "TL 19 N/B" sources
- Source: Traktorenlexikon, “Landini 9500”
- Source: Traktorenlexikon, “Massey Ferguson MF 699”